AWS A2.1 1998 | Standard Symbols for Welding, Brazing, and Nondestructive Examination |
AWS A3.0:2001 | Standard Welding Terms and Definitions |
AWS A5.1/A5.1M:2012 | Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding |
AWS A5.1/A5.1M:2004 | Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding |
AWS A5.4/A5.4M:2012 | Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding |
AWS A5.7-84R | Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes |
AWS A5.8M/A5.8:2004 | Specification for Filler Metals for Brazing and Braze Welding |
AWS A5.9/A5.9M:2006 | Specification for Bare Stainless Steel Welding Electrodes and Rods |
AWS A5.12M/A5.12:2009 | Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting |
AWS A5.14/A5.14M:2009 | Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods |
AWS A5.16/A5.16M:2013 | Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods |
AWS A5.18/A5.18M:2017 | Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding |
ANSI/AWS A5.23/A5.23M:1997 | Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding |
AWS A5.28/A5.28M:2005 | Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding |
AWS A5.28:1996 | Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Metal Arc Welding |
AWS A5.29/A5.29M:2005 | Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding |
ANSI/AWS A5.32/A5.32M-97 (R2007) | Specification for Welding Shielding Gases |
AWS A5.36/A5.36M:2012 | Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes or Gas Metal Arc Welding |
AWS B2.1/B2.1M:2021 | Specification for Welding Procedure and Performance Qualification
Page 49, subclause 5.5.3.1 |
AWS B2.1/B2.1M:2014 | Specification for Welding Procedure and Performance Qualification
Page 10, Table 4.1
Page 29, subclause 4.14.9 |
AWS B2.1/B2.1M:2009 | Specification for Welding Procedure and Performance Qualification
Page 35 - 5.6.1.1(11)
Page 62-63 - Figure B.5A and B.5B |
AWS B2.1:2005 | Specification for Welding Procedure and Performance Qualification |
AWS B2.1-1/8-229:2002 | Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1-S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, ER309(L) and E309(L) -15, -16, or -17, As-Welded Condition, Primarily Pipe Applications |
AWS B2.1-1-011:2002 | Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Stainless Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1-1-205:1996 | Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel , 1/8" through 3/4" thick, As Welded condition, Primarily Pipe Applications |
AWS B2.1-4-218:1999 | Standard Welding Procedure Specification (WPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4), Group 1 or 2) E8018-B2, 1/8 through _ in. Thick, As-Welded Condition, 1/8 through 1-1/2 in.Thick, PWHT Condition, Primarily Pipe Applications |
AWS B2.1-5A-223:1999 | Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chrome-Moly Steel, 1/8"-1-1/2" thick, As-welded or PWHT condition, Primarily Pipe Applications |
AWS B2.1-4-220:1999 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications |
AWS B2.1-8-005:2002 | Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Ausenitic Stainless Steel (M-8, P-8, S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without backing |
AWS B2.1-8-013:2002 | Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS-NAVSEA B2.1-1-311:2018 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications |
AWS-NAVSEA B2.1-1-312:2015 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-7018-M, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications |
AWS-NAVSEA B2.1-1-316:2018 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-3, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications |
AWS-NAVSEA B2.1-1-317:2018 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for 75% Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1 and MIL-71T-1, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications |
AWS-NAVSEA B2.1-8-318:2016 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications |
AWS-NAVSEA B2.1-8-319:2018 | Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX-XX, in the As-Welded Condition, Primarily Pipe for Naval Applications |
AWS BRH:2007 | Brazing Handbook |
AWS C3.2M/C3.2:2001 | Standard Method for Evaluating the Strength of Brazed Joints |
AWS C3.7M/C3.7:2005 | Specification for Aluminum Brazing - Temperature Uniformity Requirements |
AWS C3.7M/C3.7:2005 | Specification for Aluminum Brazing - Procedure for Dip Brazing |
ANSI/AWS C5.4-93 | Recommended Practices for Stud Welding |
AWS C5.10/C5.10M:2003 | Recommended Practices for Shielding Gases for Welding and Cutting |
AWS D1.1/D1.1M:2020 | Structural Welding Code – Steel |
AWS D1.1/D1.1M:2015 | Structural Welding Code – Steel |
AWS D1.1/D1.1M:2010 | Structural Welding Code – Steel |
AWS D1.1/D1.1M:2008 | Structural Welding Code – Steel |
AWS D1.1/D1.1M:2004 | Structural Welding Code – Steel |
AWS D1.1/D1.1M:2002 | Structural Welding Code – Steel |
AWS D1.1:2002 | Structural Welding Code – Steel |
AWS D1.1/D1.1:2000 | Structural Welding Code – Steel |
AWS D1.2/D1.2M:2014 | Structural Welding Code – Aluminum |
AWS D1.2/D1.2M:2008 | Structural Welding Code – Aluminum |
AWS D1.2-97 | Structural Welding Code – Aluminum |
AWS D1.3/D1.3M:2018 | Structural Welding Code – Sheet Steel |
AWS D1.3/D1.3M:2008 | Structural Welding Code – Sheet Steel |
AWS D1.3-89 | Structural Welding Code – Sheet Steel |
AWS D1.4/D1.4M:2018-AMD1 | Structural Welding Code – Steel Reinforcing Bars |
AWS D1.4/D1.4M:2011 | Structural Welding Code – Reinforcing Steel |
AWS D1.4/D1.4M:2005 | Structural Welding Code – Reinforcing Steel |
AWS D1.4-98 | Structural Welding Code – Reinforcing Steel |
AASHTO/AWS
D1.5M/D1.5:2020 | Bridge Welding Code |
AASHTO/AWS D1.5M/D1.5:2015 | Bridge Welding Code |
AASHTO/AWS D1.5M/D1.5:2010 | Bridge Welding Code |
AASHTO/AWS D1.5M/D1.5:2008 | Bridge Welding Code |
AASHTO/AWS D1.5-96 | Bridge Welding Code |
AWS D1.6/D1.6M:2017 | Structural Welding Code — Stainless Steel |
AWS D1.6/D1.6M:2007 | Structural Welding Code — Stainless Steel |
AWS D3.6M:2010 | Underwater Welding Code |
AWS D3.7:2004 | Guide for Aluminum Hull Welding |
AWS D9.1M/D9.1:2012 | Sheet Metal Welding Code |
AWS D10.7M/D10.7:2000 | Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe |
AWS D14.1/D14.1M:2005 | Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
AWS D14.1/D14.1M:2005-AMD1 | Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
AWS D14.3/D14.3M:2019 | Specification for Welding Earthmoving, Construction, Agricultural, and Ground-Based Material Handling Equipment |
AWS D14.6/D14.6M:2005 | Specification for Welding Rotating Elements of Equipment |
AWS D14.7/D14.7M:2005 | Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls |
AWS D15.1/D15.1M:2012 | Railroad Welding Specification for Cars and Locomotives |
AWS D15/D15.1M:2007 | Railroad Welding Specification for Cars and Locomotives |
AWS D15.1:2001 | Railroad Welding Specification — Cars and Locomotives |
AWS D15.2:2003 | Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles |
AWS D17.1/D17.1M:2017 | Specification for Fusion Welding for Aerospace Applications |
AWS D17.1/D17.1M:2010 | Specification for Fusion Welding for Aerospace Applications |
AWS D17.1:2001 | Specification for Fusion Welding for Aerospace Applications |
AWS D17.2/D17.2M:2007 | Specification for Resistance Welding for Aerospace Applications |
D20.1/D20.1M:2019 | Specification for Fabrication of Metal Components using Additive Manufacturing |
