RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1980 1981 1982 1983 1984 1985 1986 1987 1988 1989

• Laser Beam Welding of High-Manganese Stainless Steels - Examination of Alloying Element Loss and Microstructural Changes
  BY P. A. A. Khan, T. Debroy and S. A. David
  Published January/1988
• Weldability of Newly Developed Austenitic Alloys for Cryogenic Service: Part II - High-Nitrogen Stainless Steel Weld Metal,
  BY T. Ogawa and T. Koseki
  Published January/1988
• Modeling of Non-Autogenous Welding
  BY T. Zacharia, A. H. Eraslan and D. K. Aidun
  Published January/1988

• Power and Current Distributions in Gas Tungsten Arcsg
  BY M. Lu and S. Kou
  Published February/1988
• Weldability Evaluations of Modified 316 and 347 Austenitic Stainless Steels: Part 1 - Preliminary Resultsr
  BY C. D. Lundin, C. H. Lee, R. Menon and V. Osorio
  Published February/1988
• Wide Joint Clearance Brazing with Nickel-Base Filler Metals
  BY E. Lugscheider, V. Dietrich and J. Mittendorff
  Published February/1988

• Modeling of Autogenous Welding
  BY T. Zacharia, A. H. Eraslan and D. K. Aidun
  Published March/1988
• Welding Behavior and Microstructure of a Ni3AI Alloy
  BY M. L. Santella, J. A. Horton and S. A. David
  Published March/1988
• Fluid Flow and Heat Transfer in GMA Weld Pools
  BYK. C. Tsao and C. S. Wu
  Published March/1988

• A Study of Heat-Affected Zone and Weld Metal Liquation Cracking in Alloy 903
  BY W. A. Baeslack III, W. P. Lata and S. L. West
  Published April/1988
• The Effects of Heat Input and Weld Process on Hot Cracking in Stainless Steel
  BY G. M. Goodwin
  Published April/1988

• The Effect of Cooling Rate on Ferrite in Type 308 Stainless Steel
  BY J. M. Vitek and S. A. David
  Published May/1988
• Experiments on Some Arbitrarily Loaded Fillet Welds
  BY E. Sanaei and A. G. Kamtekar
  Published May/1988

• Rapid Solidification of Stainless Steels by Capacitor Discharge Welding
  BY V. P. Kujanpaa, L. P. Karjalainen and H. A. V. Sikanen
  Published June/1988
• Hot Ductility and Weldability of Free Machining Austenitic Stainless Steel
  BYC. D. Lundin, C. H. Lee and R. Menon
  Published June/1988
• Investigation of Hydrogen-Assisted Cracking in FCA Welds on HY-80 Steel
  BY E. F. Nippes and D. J. Xiong
  Published June/1988

• Inertia Friction Welding of Rapidly Solidified Powder Metallurgy Aluminum
  BY W. A. Baeslack III and K. S. Hagey
  Published July/1988
• Finite Element Analysis of Three-Dimensional Transient Heat Transfer in CMA Welding
  BY P. Tekriwal and J. Mazumder
  Published July/1988
• The Behavior of Silver-Aided Diffusion-Welded Joints under Tensile and Torsional Loads
  BYJ. W. Elmer, M. E. Kassner and R. S. Rosen
  Published July/1988

• Hydrogen-Assisted Cracking in High-Strength Pipeline Steels
  BY E. G. Signes and P. Howe
  Published August/1988
• Strength of Aluminum T-Joint Fillet Welds
  BY C. Marsh
  Published August/1988
• The Effects of Cerium and Titanium Additions on Hot Cracking in Welds of a Cr-Mo-V Rotor Steel
  BY A.-L. Lu, S. Y. Yoo and A. W. Pense
  Published August/1988

• Multipass, Autogenous Electron Beam Welding
  BY J. L. Murphy, T. M. Mustaleski, Jr., and L. C. Watson
  Published September/1988
• Microstructure/Mechanical Property Relationships in Thick-Section C-Mn Narrow-Groove Weldst
  BY J. T. McGrath, R. S. Chandel, R. F. Orr and J. A. Gianetto
  Published September/1988
• The Effects of Minor Elements on the Welding Characteristics of Stainless Steel
  BY by B. Pollard
  Published September/1988

• High-Temperature Brazing of Stainless Steel with Low-Phosphorus Nickel-Based Filler Metal
  BYE. Lugscheider and T. Cosack
  Published October/1988
• A Multilayer Clad Aluminum Material with Improved Brazing Properties
  BY H. Engstrom and L.-O. Gullman
  Published October /1988
• Brazing Ceramic Oxides to Metals at Low Temperatures
  BY I. P. Hammond, S. A. David and M. L. Santella
  Published October/1988
• Optimization of the Plasma Arc Welding Process
  BY V. V. Bashenko and N. A. Sosnin
  Published October/1988

• Ultrasonic Sensing of Weld Pool Penetration
  BYN. M. Carlson and J. A. Johnson
  Published November/1987
• Arc and Weld Pool Behavior for Pulsed Current GTAW
  BY H. R. Saedi and W. Unkel
  Published November/1988
• Data Acquisition and Analysis for EB Welding in Perspective
  BY J. O. Milewski, S. Fetzko and R. D. Dixon
  Published November/1988
• Friction Welding of Incompatible Materials
  BY F. Sassani and J. R. Neelam
  Published November/1988

• Coating Weight Effect on the Resistance Spot Weldability of Electrogalvanized Sheet Steels
  BY P. Howe and S. C. Kelley
  Published December/1988
• Elevated Temperature and Mechanical Properties of Al-Li-Cu-Mg Alloy
  BY Zacharia and D. K. Aidun
  Published December/1988
• Ferrite Number Prediction to 100 FN in Stainless Steel Weld Metalt
  BY T. A. Siewert, C. N. McCowan and D. L. Olson
  Published December/1988
• Prediction of Electron Beam Depth of Penetration
  BY L. N. Tallerico
  Published December/1988