RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1980 1981 1982 1983 1984 1985 1986 1987 1988 1989

• An Examination of Nugget Development during Spot Welding, Using Both Experimental and Analytical Techniques
  BY J. E. Goulds
  Published January/1987
• Detectability and Significance of Buried Tears in Welded T-Joints
  BY R. D. Stout and J. H. Koh
  Published January/1987
• Discontinuities Formed in Inconel GTA Welds
  BY R. A. Patterson, R. B. Nemec and R. D. Reiswig
  Published January/1987
• Development of a Test for Determining Fracture Toughness of Brazed Joints in Ceramic Materials
  BY A. J. Moorhead and P. F. Becher
  Published January/1987

• Development of a New Hot-Cracking Test - The Sigmajig
  BY C.M. Goodwin
  Published February/1987
• A Methodology for Characterizing Weldment Fracture Behavior
  BY E. P. Cox
  Published February/1987
• Fatigue Life Prediction for GMA Welded Butt Joints in a C-Mn-Si Steel
  BY Y. Itoh
  Published February/1987
• Hot-Cracking Mechanism in C 0 2 Laser Beam Welds of Dissimilar Metals Involving PH Martensitic Stainless Steels
  BY M. J. Cieslak
  Published February/1987

• Sulfide Stress Corrosion Cracking in Low-Alloy Steel Inertia Friction Welds
  BY M. D. Tumuluru
  Published March/1987
• Effect of Copper-Rich Regions on Tensile Properties of VPPA Weldments of 2219-T87 Aluminum
  BY A. Hartman, R. J. Beil and G. T. Hahn
  Published March/1987
• Manganese and Nitrogen in Stainless Steel SMA Welds for Cryogenic Service
  BY C. N. McCowan, T. A. Siewert, R. P. Reed and F. B. Lake
  Published March/1987

• Predicting the Fatigue Resistance of Steel Weldments
  BY R. A. Testin, J.-Y. Yung, F. V. Lawrence, Jr., and R. C. Rice
  Published April/1987
• A Comparison of Lap Shear and Pin-Collar Specimens for Evaluating A286 Stainless Steel Brazes
  BY J. R. Spingarn
  Published April/1987
• Fracture Toughness of Thermally Aged Alloy 718 Weld Metal
  BY W. J. Mills
  Published April/1987
• Mechanical Properties of Fully Austenitic Weld Deposits for Cryogenic Structures
  BY T. Matsumoto, H. Satoh, Y. Wadayama and F. Hataya
  Published April/1987

• Weldability Test for Thin Sheet Materials
  BY S. A. David and J. J. Woodhouse
  Published May/1987
• Mathematical Modeling of Melting Rates for Submerged Arc Welding
  BY R. S. Chandel
  Published May/1987
• Hydrogen-Induced Cracking Susceptibility in High-Strength Weld Metal
  BY N. Okuda, Y. Ogata, Y. Nishikawa, T. Aoki, A. Goto and T. Abe
  Published May/1987
• Effect of the Number of Passes on the Structure and Properties of Submerged Arc Welds of AISI Type 316L Stainless Steel
  BY I. Gowrisankar, A. K. Bhaduri, V. Seetharaman, D. D. N. Verma and D. R. C. Achar
  Published May/1987

• Weld Discontinuities in Austenitic Stainless Steel Sheets - Role of Steel Type
  BY V. P. Kujanpaa, L. P. Karjalainen and H. A. V. Sikanen
  Published June/1987
• Effect of Weld Discontinuities on Fatigue of Aluminum Butt Joints
  BY C. E. Nordmark, W. C. Herbein, P. B. Dickerson and T. W. Montemarano
  Published June/1986
• Thermal Surge in Diffusion Welding - Generation, Inrush Characteristic and Effects
  BY J. Godziemba-Maliszewski
  Published June/1987

• Intermetallic Formation in Soldered Copper-Based Alloys at 150° to 250°C
  BY E. K. Ohriner
  Published July/1987
• The Effect of Electrode Weave Procedure on HY-80 GMA Welds
  BY T. A. Siewert, R. E. Trevisan and P. T. Purtscher
  Published July/1987
• Evaluation of Tensile Flow Properties of Weldments in Titanium Alloys
  BY M. A. Imam, R. W. Judy, Jr., and B. B. Rath
  Published July/1987
• Mechanical Properties of HSLA Steel Buried Gas Tungsten Arc Weldments
  BY W. E. Lukens
  Published July/1987

• Characterization of Heat-Affected Zone Cracking in Austenitic Stainless Steel Welds
  BY V. P. Kujanpaa, S. A. David and C. L. White
  Published August/1987
• Fatigue Crack Propagation Behavior of Type 316 (16-8-2) Weldments at Elevated Temperatures
  BY L. A. James and W. J. Mills
  Published August/1987
• Nanoindentation Microhardness Study of Low-Temperature Ferrite Decomposition in Austenitic Stainless Steel Welds
  BY S. A. David, J. M. Vitek, J. R. Keiser and W. C. Oliver
  Published August/1987
• An Investigation of Weld Hot Cracking in Duplex Stainless Steels
  BY D. E. Nelson, W. A. Baeslack III and J. C. Lippold
  Published August/1987

• Investigation of Heat-Affected Zone Cracking of GMA Welds of Al-Mg-Si Alloys Using the Varestraint Tests
  BY H. W. Kerr and M. Katoh
  Published September/1987
• Cinematography of Resistance Spot Welding of Galvanized Steel Sheet
  BY C. T. Lane, C. D. Sorensen, G. B. Hunter, S. A. Gedeon and T. W. Eagar
  Published September/1987
• The Heat-Affected Zone Toughness of Low-Carbon Microalloyed Steels
  BY C. Thaulow, A. J. Paauw and K. Guttormseny
  Published September/1987
• The Effect of Iron Dilution on Cu-Ni Weld Deposits Used in Seawater
  BY R. K. Wilson, T. J. Kelly and S. D. Kiser
  Published September/1987

• Effect of Rapid Solidification on Stainless Steel Weld Metal Microstructures and Its Implications on the Schaeffler Diagram
  BY S. A. David, |. M. Vitek and T. L. Hebble
  Published October/1987
• Improvement of HAZ Toughness in HSLA Steel by Introducing Finely Dispersed Ti-Oxide
  BY H. Homma, S. Ohkita, S. Matsuda and K. Yamamoto
  Published October /1987
• Compositional Parameters for HAZ Cracking and Hardening in C-Mn Steels
  BY P. H. M. Hart and P. H. Harrison
  Published October/1987

• An Analytical Model for Laser Reflow Soldering of an Electronic Component
  BY D. U. Chang
  Published November/1987
• Weldability of Newly Developed Austenitic Alloys for Cryogenic Service: Part 1 - Up-to-date Overview of Welding Technology
  BY T. Ogawa and T. Koseki
  Published November/1987
• The Influence of Yttrium Microadditions on Titanium Weld Metal Cracking Susceptibility and Grain Morphology
  BY M. C. Nordin, G. R. Edwards and D. L. Olson
  Published November/1987

• Experimental Measurement of Thin Plate 304 Stainless Steel GTA Weld Pool Surface Temperatures
  BY H. G. Kraus
  Published December/1987
• Investigation of Heat-Affected Zone Cracking of GTA Welds of Al-Mg-Si Alloys Using the Varestraint Test
  BY M. Katoh and H. W. Kerr
  Published December/1987
• Visible Light Emissions during Gas Tungsten Arc Welding and Its Application to Weld Image Improvement
  BY E. W. Kim, C. Allemand and T. W. Eagar
  Published December/1987
• Measurement of Dynamic Electrical and Mechanical Properties of Resistance Spot Welds
  BY S. A. Gedeon, C. D. Sorensen, K. T. Ulrich and T. W. Eagar
  Published December/1987
• Commentary: Mathematical Modeling of Melting Rates for Submerged Arc Welding
  Published December/1987