RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1980 1981 1982 1983 1984 1985 1986 1987 1988 1989

• Dissolution and Deposit of Base Metal in Dissimilar Metal Brazing
  BY T. Yoshida and H. Ohmura
  Published January/1985
• Transmission Electron Microscopy of Welded Cb-Microalloyed Steel
  BY P. L. Mangonon
  Published January/1985
• Welding and Weldability of Nickel-Iron Aluminides
  BY S. A. David, W. A. Jemian, C. T. Liu, and J. A. Horton
  Published January/1985
• Fatigue Test of Residual Stress Induced Specimens in Carbon Steel
  BY T. Toyooka, T. Tsunenari, R. Ide, and T. Tange
  Published January/1985

• Thermal Processes in Covered Electrodes
  BYJ. H. Waszink and M. I. Piena
  Published February/1985
• Plasma Monitoring of Laser Beam Welds
  BY G. K. Lewis and R. D. Dixon
  Published February/1985
• Study of Mechanical Properties of Weldments by Impression Tests
  BY H. Y. Yu, M. A. Imam, and B. B. Rath
  Published February/1985
• Technical Note: Autogenous GTA Weldments - Bead Geometry Variations Due to Minor Elements
  BY D. W. Walsh and W. F. Savage
  Published February/1985

• Influence of Microstructure on Mechanical Properties of Two Single-Bead Ferritic Weld Metals
  BY M. A. Munnig Schmidt-Van Der Burg, S. Hoekstra, and G. Den Ouden
  Published March/1985
• Electron Emission and Plasma Formation During Laser Beam Welding
  BY R. D. Dixon and G. K. Lewis
  Published March/1985
• Welding of Ductile Iron with Ni-Fe-Mn Filler Metal
  BY T. J. Kelly, R. A. Bishel, and R. K. Wilson
  Published March/1985
• Silver Scavenging Inhibition of Some Silver Loaded Solders
  BY R. A. Bulwith and C. A. MacKay
  Published March/1985

• The Relationship Between Grain Size and Microfissuring in Alloy 718
  BY R. G. Thompson, J. J. Cassimus, D. E. Mayo and J. R. Dobbs
  Published April/1985
• Optimizing Repair Welding Techniques in Cast Steels - Part Il
  BY D. K. Aidun and W. F. Savage
  Published April/1985
• An Investigation of Diffusion Welding of Pure and Alloyed Aluminum to Type 316 Stainless Steel
  BY P. D. Calderon, D. R. Walmsley and Z. A. Munir
  Published April/1985
• Fissuring in the "Hazard HAZ" Region of Austenitic Stainless Steel Welds
  BY C. D. Lundin and C. P. D. Chou
  Published April/1985

• Hot-Cracking Studies of Alloy CN-7M
  BY M. J. Cieslak and W. F. Savage
  Published May/1985
• Centerline Cracking in Deep Penetration Electron Beam Welds in Type 304L Stainless Steel
  BY by J. C. Lippold
  Published May/1985
• Technical Note: Bead Shape Variance in AISI 8630 Steel GTAW Weldments
  BY D. W. Walsh and W. F. Savage
  Published May/1985
• Flux Composition Dependence of Microstructure and Toughness of Submerged Arc HSLA Weldments
  BY C. B. Dallam, S. Liu, and D. L. Olson
  Published May/1985

• High Temperature Impression Creep Testing of Weldments
  BY W. S. Gibbs, S. H. Wang, D. K. Matlock, and D. L. Olson
  Published June/1985
• Effects of S02 Shielding Gas Additions on GTA Weld Shape
  BY C. R. Heiple and P. Burgardtt
  Published June/1985
• Influence of Arc Pressure on Weld Pool Geometry
  BY M. L. Lin and T. W. Eagar
  Published June/1985
• Creep-Rupture Characteristics of Type 304 Stainless Steel Weldments with Type 308 Stainless Steel Welds at 1100° F
  BY M. J. Manjoine
  Published June/1985

• Sodium Compatibility of Refractory Metal Alloy-Type 304L Stainless Steel Joints
  BY F. M. Hosking
  Published July/1985
• Ultrasonic Evaluation of Spot Weld Quality
  BY S. I. Rokhlin and L. Adler
  Published July/1985
• Cooling Time and Features of Submerged Arc Weld Beads
  BY R. S. Chandel and S. R. Bala
  Published July/1985
• Adaptive Welding by Fiber Optic Thermographic Sensing: An Analysis of Thermal and Instrumental Considerations
  BY J. P. Boillot, P. Cielo, C. Begin, C. Michel, M. Lessard, P. Farard, and D. Villemure
  Published July/1985

• Diffusion Welding of MA 6000 and a Conventional Nickel-Base Superalloy
  BY T. J. Moore and T. K. Glasgow
  Published August/1985
• GTA Weld Cracking - Alloy 625 to 304L
  BY R. A. Patterson and J. O. Milewski
  Published August/1985
• A Microstructural Study of Local Melting of Gray Cast Iron with a Stationary Plasma Arc
  BY T. Ishida
  Published August/1985
• Study of Metal Transfer in Pulsed GMA Welding
  BY S. Ueguri, K. Hara and H. Komura
  Published August/1985

• Surface Tension Gradient-Driven Flow Around an Electron Beam Welding Cavity
  BY P. S. Wei and W. H. Giedt
  Published September/1985
• Analysis of 5-Ferrite Data from Production Welds on Stainless Steel Pipe
  BY T. L. Hebble, D. A. Canonico, D. P. Edmonds, G. M. Goodwin, and R. K. Nanstad
  Published September/1985
• Thermal Analysis of GTA Welding Electrodes
  BY S. Kou and M. C. Tsai
  Published September/1985

• Failure Investigation of Eddystone Main Steam Piping
  BY J. F. DeLong, J. E. Bynum, F. V. Ellis, M. H. Rafiee, W. F. Siddall, T. Daikoku and H. Haneda
  Published October/1985
• Prediction of Austenitic Weld Metal Microstructure and Properties
  BY D. L. Olson
  Published October /1985
• Simulation of Tack Welding Procedures in Butt Joint Welding of Plates
  BY M. Jonsson, L. Karlsson and L-E. Lindgreni
  Published October/1985

• Shielding Gas and Heat Input Effects on Flux Cored Weld Metal Properties
  BY S. Lathabai and R. D. Stout
  Published November/1985
• Optimization of Conventional SAW for Severe Abrasion-Wear Hardfacing Application
  BY J. C. Majetich
  Published November/1985
• Fe-Mn-Ni-Cu-C Filler Metal for Welding Ductile Cast Iron
  BY J. A. Self, S. A. Abdulgader and D. L. Olson
  Published November/1985

• Thermal Behavior of Austenitic-Ferritic Transition Joints Made by Friction Welding
  BY K. G. K. Murti and S. Sundaresan
  Published December/1985
• Strength of Aluminum Fillet Welds
  BY V. P. Kujanpaa
  Published December/1985
• Temperature Measurements in Gas Tungsten Arcs
  BY G. N. Haddad and A. J. D. Farmer
  Published December/1985
• The Sources of Oxygen and Nitrogen Contamination in Submerged Arc Welding Using CaO-AI203 Based Fluxes
  BY T. Lau, G. C. Weatherly and A. McLean
  Published December/1985