RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1980 1981 1982 1983 1984 1985 1986 1987 1988 1989

• An Investigation of Heat-Affected Zone Hot Cracking in Alloy 800
  BY J. C. Lippold
  Published January/1983
• "In Situ" Determination of Transformation Temperatures in the Weld Heat-Affected Zone
  BY R. H. Phillip
  Published January/1983
• Technical Note: An Electrochemical Evaluation of Sensitization
  BY S. C. Tjong, J. Kepner, and Z. Eliezer
  Published January/1983
• Hot Cracking Problems in Different Fully Austenitic Weld Metals
  BY G. Rabensteiner, J. Tosch, and H. Schabereiter
  Published January/1983

• Experimental Investigation of GTA Weld Pool Oscillations
  BY R. J. Renwick and R. W. Richardson
  Published February/1983
• Fatigue Behavior of Welded Steel Butt Joints Containing Artificial Discontinuities
  BY M. D. Bowman and W. H. Munse
  Published February/1983
• Weld Defects in Austenitic Stainless Steel Sheets - Effect of Welding Parameters
  BY V. P. Kujanpaa
  Published February/1983
• Laser Beam Welding of Aluminum Alloy 5456
  BY D. W. Moon and E. A. Metzbower
  Published February/1983

• Hydrogen-Induced Cracking in Flux-Cored Electrode Welds
  BY S. Lathabai and R. D. Stout
  Published March/1983
• Effects of Electrode Composition, Flux Basicity, and Slag Depth on Grain-Boundary Cracking in Electroslag Weld Metals
  BY P. J. Konkol
  Published March/1983
• Surface Active Element Effects on the Shape of GTA, Laser, and Electron Beam Welds
  BY C. R. Heiple, J. Roper, R. T. Stagner and R. J. Aden
  Published March/1983
• Effects of GTA Dressing on the Fatigue Properties of Aluminum Alloy Welded, Butt Jointed and Fillet Welded Plates
  BY I. J. Polmear and D. R. Wilkinson
  Published March/1983
• A Study of Heat-Affected Zone Structures in Ductile Cast Iron
  BY R. C. Voigt and C. R. Loper, Jr.
  Published March/1983

• Lamellar Tearing in Fillet Weldments of Pressure Vessel Fabrications
  A. D. Hattangadi and B. B. Seth
  Published April/1983
• Influence of Electroslag Weld Metal Composition on Hydrogen Cracking
  BY R. Thibau and S. R. Bala
  Published April/1983
• Laser Welding of Aluminum and Aluminum Alloys
  BY C. A. Huntington and T. W. Eagar
  Published April/1983
• Experimental Investigation of the Forces Acting on a Drop of Weld Metal
  BY J. H. Waszink and L. H. J. Graat
  Published April/1983

• Significance of Blunt Flaws in Pipeline Girth Welds
  BY M. B. Kasen
  Published May/1983
• Prevention of Temper Embrittlement in 2'/4 Cr-1 Mo Weld Metal by Metallurgical Actions
  BY J. Grosse-Wordemann and S. Dittrich
  Published May/1983
• Prevention of Solidification Cracking in Very Low Carbon Steel Welds
  BY S. Ohshita, N. Yurioka, N. Mori and T. Kimura
  Published May/1983
• Mechanisms Producing Metallic Bonds in Cold Welding
  BY N. Bay
  Published May/1983
• Technical Note: Metallographic Sulphur Determination by SEM in Austenitic Stainless Steel Weld Metal
  BY J. I. Morgenfeld, M. Solari, and J. Ovejero-Garcia
  Published May/1983

• Determination of Necessary Preheating Temperature in Steel Welding
  BY N. Yurioka, H. Suzuki, S. Ohshita and S. Saito
  Published June/1983
• A Simple Test for Dissimilar-Metal Welds
  BY R. L. Klueh, J. F. King and |. L. Griffith
  Published June/1983
• High Temperature Brazing of Stainless Steel with Nickel-Base Filler Metals BNi-2, BNi-5 and BNi-7
  BY E. Lugscheider and K.-D. Partz
  Published June/1983
• An Extended Rosenthal Weld Model
  BY A. C. Nunes, Jr.
  Published June/1983

• Friction Weld Ductility and Toughness as Influenced by Inclusion Morphology
  BY B. J. Eberhard, B. W. Schaaf, Jr., and A. D. Wilson
  Published July/1983
• Process Variable Influence on Arc Temperature Distribution
  BY J. F. Key, J. W. Chan and M. E. Mcllwain
  Published July/1983
• Signature Analysis of Contact Voltage of Resistance Welds
  BY S. P. Owusu-Ofori and S. M. Wu
  Published July/1983
• Investigations on Chemical Composition of Welding Fumes
  BY M. Kobayashi, S. Maki, Y. Hashimoto and T. Suga
  Published July/1983

• Effect of Stress Relief on Microalloyed Weld Metal Impact Properties
  BY C. H. Entrekin
  Published August/1983
• The Influence of Nitrogen from Welding on Stainless Steel Weld Metal Microstructure
  BY R. K. Okagawa, R. D. Dixon, and D. L. Olson
  Published August/1983
• The Development of a Ferritic Consumable for Welding Grain-Refined Fe-12Ni-0.25Ti to Retain Toughness at 4.2 K
  BY H. J. Kim and J. W. Morris, Jr
  Published August/1983
• Variations in Weld Ferrite Content Due to P and S
  BY J. A. Brooks, A. W. Thompson, and J. C. Williams
  Published August/1983

• Infrared Thermography for Sensing the Arc Welding Process
  BY P. W. Turner and G. D. Eichenberger
  Published September/1983
• The Aging Response of a Welded Iron-Based Superalloy
  BY M. J. Strum, L. T. Summers and J. W. Morris, Jr.
  Published September/1983
• Tensile and Toughness Properties of Arc-Welded 5083 and 6082 Aluminum Alloys
  BY M. H. Scott and M. F. Gittos
  Published September/1983
• Preliminary Observations of the Type, Shape and Distribution of Inclusions Found in Submerged Arc Weldments,
  BY KB. R. Keville
  Published September/1983

• Nickel Base Filler Metals of Low Precious Metal Content
  BY E. Lugscheider and H. Pelster
  Published October/1983
• Grain Boundary Penetration During Brazing of Aluminum
  BY D. J. Schmatz
  Published October /1983
• Wetting in Vacuum-Inert Gas Partial Pressure Atmosphere Brazing
  BY A. Sakamoto
  Published October/1983
• Effect of Strain Rate and Temperature on Yielding and Fracture Toughness of Brazed joints of Inconel 718
  BY B. Z. Weiss and B. Grushko
  Published October/1983
• Effect of Long Term Elevated Temperature Aging on the Electrical Resistance of Soldered Copper Joints
  BY W. J. Reicheneckerr
  Published October/1983
• Surface Reactions and Wetting Mechanisms of Titanium- and Aluminum-Containing Nickel-Base and Iron-Base Alloys During Brazing under Vacuum
  BY E. Lugscheider, H. Zhuang and M. Maier
  Published October/1983

• The Toughness and Fatigue Strength of Welded Joints with Buried Lamellar Tears
  BY E. J. Kaufmann and R. D. Stout
  Published November/1983
• Convection in Arc Weld Pools
  BY G. M. Oreper, T. W. Eagar and J. Szekely
  Published November/1983
• The Effect of Carbon on the Microstructure and Properties of C-Mn All-Weld-Metal Deposits,
  BY D. J. Kotecki
  Published November/1983
• Submerged Arc Welding a Low-Carbon, Copper-Strengthened Alloy Steel
  By R. J Jesseman and G. C. Schmid
  Published November/1983
  

• A Theoretical Analysis of the Stability of Surface Oxides During Diffusion Welding of Metals
  BY Z. A. Munir
  Published December/1983
• Microstructural Evolution in the HAZ of Inconel 718 and Correlation with the Hot Ductility Test
  BY R. G. Thompson and S. Genculu
  Published December/1983
• Temperature Fields Produced by Travelling Distributed Heat Sources
  BY T. W. Eagar and N. -S. Tsai
  Published December/1983
• Mechanisms of Power Dissipation in the Column of High Pressure Argon-Tungsten Arcs
  BY C. J. Allum
  Published December/1982