RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1980 1981 1982 1983 1984 1985 1986 1987 1988 1989

• A Constitutive Equation for the Critical Energy Input during Electroslag Welding
  BY R. H. Frost, C. R. Edwards and M. D. Rheinlander
  Published January/1981
• A Weldability Testing Procedure for Premium Rail Steels with Reference to V-N Steels
  BY Z. Paley, J. NG-Yelim and P. Martin
  Published January/1981
• Residual Stress Measurements in Repair-Welded Titanium Sheets
  BY K. C. Wu
  Published January/1981
• Dissolution of Copper Cylinder in Molten Tin under Dynamic Conditions
  BY Y. Shoji, S. Uchida and T. Ariga
  Published January/1981

• Radiation-Induced Swelling in Stainless Steel Weld Metal
  BY W. F. Savage, E. F. Nippes and G. J. Bruck
  Published February/1981
• Heat Transfer and Penetration Mechanisms with GMA and Plasma-GMA Welding
  BY W. G. Essers and R. Walter
  Published February/1981

• An Evaluation of Factors Significant to Lamellar Tearing
  BY E. J. Kaufmann, A. W. Pense and R. D. Stout
  Published March/1981
• Determination of Diffusible Hydrogen in Weldments by the RPI Silicone-Oil Extraction Method
  BY E. F. Nippes, D. J. Ball and W. J. Gestal, Jr
  Published March/1981
• Process Modifications to Improve HAZ Toughness in High Deposition Arc Welds
  BY E. G. Signes and J. C. Baker
  Published March/1981

• Ferrite Morphology and Variations in Austenitic Stainless Steel Welds
  BY S. A. David
  Published April/1981
• Fracture Behavior of Ferrite-Free Stainless Steel Welds in Liquid Helium
  BY T. A. Whipple, H. I. McHenry and D. T. Read
  Published April/1981

• Electron Beam Weldability of Advanced Titanium Alloys
  BY R. W. Messier, Jr
  Published May/1981
• Use of Instrumented Charpy Tests to Determine Onset of Upper-Shelf Energy
  BY D. A. Canonico, W. J. Stelzman, R. G. Berggren and R. K. Nanstad
  Published May/1981
• Technical Note: Comment on the Transformation S-^y by a Massive Mechanism in Austenitic Stainless Steel
  BY N. Suutala, T. Takalo and T. Moisio
  Published May/1981

• Heat-Affected Zone Cracking of Al-Mg-Si Alloys
  BY N. F. Gittos and M. H. Scott
  Published June/1981
• The Mechanisms of Formation of Weld Defects in High-Frequency Electric Resistance Welding
  BY H. Haga, K. Aoki and T. Sato
  Published June/1981
• Technical Note: Effect of Weld Pool Configuration on Heat-Affected Zone Shape
  BY S. S. Glickstein and E. Friedman
  Published June/1981

• The Measurement of Crack Arrest Fracture Toughness in Welded 9% Nickel Steels Used in Cryogenic Storage Tanks
  BY R. M. Bruscato
  Published July/1981
• A Comparative Evaluation of Laser and Gas Tungsten Arc Weldments in High Temperature Titanium Alloys
  BY W. A. Baeslack III and C. M. Banas
  Published July/1981
• Ferrite Morphology in High Molybdenum Stainless Steel
  BY M. J. Cieslak and W. F. Savage
  Published July/1981

• Weldability of Ferritic Stainless Steels
  BY D. H. Kah and D. W. Dickinson
  Published August/1981
• Effect of Selenium on GTAW Fusion Zone Geometry
  BY C. R. Heiple and J. R. Roper
  Published August/1981
• The Effect of Alloying Elements on the Sigma Phase Formation in the 18-8 Weld Metals
  BY J. Wegrzyn and A. Klimpel
  Published August/1981

• Hydrogen-Assisted Cracking in HSLA Pipeline Steels
  BY R. Vasudevan, R. D. Stout and A. W. Pense
  Published September/1981
• The Effect of Testing Procedures in Implant Test Results
  BY A. J. Bryhan
  Published September/1981
• Mechanical Properties of Weldments in Experimental Fe-12Mn-0.2Ti and Fe-12Mn-1Mo-0.2Ti Alloys for Cryogenic Service
  BY J. R. Stephens, J. H. Devletian and W. R. Witzke
  Published September/1981

• The Use of TETIG Diagrams in High Temperature Brazing
  BY R. Johnson
  Published October/1981
• Mechanism for Critical Magnesium Diffusion in Vacuum Brazing of Aluminum Sheet
  BY Peter Vernia
  Published October/1981
• Effect of Solder Thickness and Joint Overlap on the Electrical Resistance of Soldered Copper Joints
  BY W.J. Reichenecker
  Published October/1981
• Scanning the Solderability of a Surface
  BY G. Becker
  Published October/1981

• The Fracture Toughness of Steel-Aluminum Deformation Welds
  BY C. E. Albright
  Published November/1981
• Vapor Phase Brazing of Copper Plated Carbon Steel in a Zinc Vapor
  BY by T. Osawa
  Published November/1981
• Correlation of Properties and Microstructure in Welded Ti-6AI-6V-2Sn
  BY K. C. Wu
  Published November/1981
• Weld Pool Segregation During the Welding of Low Alloy Steels with Austenitic Electrodes
  BY F. Ornath, J. Soudry, B. Z. Weiss
  Published November/1981
• The Fatigue Resistance of Plasma and Oxygen Cut Steel
  BY N-J Ho, F. V. Lawrence, Jr., and C. J. Altstetter
  Published November/1981

• Ferrite Vein Cracking in Electroslag Welds
  BY J. A. Davenport, B.-N. Qian, A. W. Pense and R. D. Stout
  Published December/1981
• Fabricating Steel Safely Using the Electroslag Welding Process - Part I
  BY D. H. Shackleton
  Published December/1981
• Sensitivity of Electroslag Weld Metal to Hydrogen
  BY L. N. Pussegoda and W. R. Tyson
  Published December/1981
• Hydrogen in Consumable Guide Electroslag Welds
  BY G. Lowe, S. R. Bala and L. Malik
  Published December/1981
• Fracture Resistance of 4-in. Thick A36 and A588 Grade A Electroslag Weldments
  BY J. F. Sovak
  Published December/1981