RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1970 1971 1972 1973 1974 1975 1976 1977 1978 1979

• The Effect of Shielding Gas Additions on the Penetration Characteristics of Plasma-Arc Welds
  BY C. D. Lundin and W. J. Ruprecht
  Published January/1977
• High Cycle Fatigue Behavior of 5086-H116 Aluminum Alloy Electron Beam Welds
  BY R. R. Hardy, Jr.
  Published January/1977
• Acceptance Levels of Weld Defects for Fatigue Service
  BY C. F. BouIton
  Published January/1977
• Properties of a Fully Austenitic Stainless Steel Weld Metal for Severe Corrosion Environments
  BY A. Backman and B. Lundqvist
  Published January/1977

• Report on the Henniker Conference on: Welding R & D - Problems and Opportunities
  BY P. W. Ramsey
  Published February/1977
• Development of the Thermo-Acoustic Upset-Butt Welding Process
  BY G. N. Fischer and R. C. McMaster
  Published February/1977
• Fluxless Induction Brazing of Aluminum in Air
  BY K. C. Lin
  Published February/1977
• Furnace Brazing of Steel with Brass Filler Metal
  BY I. Kawakatsu and T. Osawa
  Published February/1977
• Influence of Bending Stresses on Fatigue Crack Propagation Life in Butt Joint Welds
  BY J. D. Burk and F. V. Lawrence
  Published February/1977

• Controlled Weld-Pool Solidification Structure and Resultant Properties with Yttrium Inoculation of Ti-6AI-6V-2Sn Welds
  BY R. P. Simpson
  Published March/1977
• Effect of Welding Variables on Lamellar Tearing Susceptibility in the Lehigh Test
  BY S. Ganesh and R.D. Stout
  Published March/1977
• Eliminating Cold-Shut Defects in Deep, Single-Pass Electron Beam Welds in Uranium
  BY D. H. Wood and G.L. Mara
  Published March/1977
• Use of Emission Spectroscopy for Welding Arc Analysis
  BY G. S. Mills
  Published March/1977

• Weldability of High Toughness Fe-12% Ni Alloys Containing Ti, Al or Nb
  BY J. H. Devletian, J. R. Stephens and W. R. Witzke
  Published April/1977
• Fracture Behavior of the Heat-Affected Zone in 5% Ni Steel Weldments
  BY H.l. McHenry and R.P. Reed
  Published April/1977
• The HAZ Impact Toughness of a Mn-Mo-Nb Linepipe Steel
  BY R. Eftekhar and C. D. Lundin
  Published April/1977
• A Fundamental Difficulty in Charpy V-Notch Testing Narrow Zones in Welds
  BY J. A. Goldak and D. S. Nguyen
  Published April/1977
• Effect of Minor Elements on Fusion-Zone Dimensions of Inconel 600
  BY W. F. Savage, E. F. Nippes and C. M. Goodwin
  Published April/1977

• Arc and Pool Instability in CTA Welding
  BY J. C. Metcalfe and M. B. C. Quigley
  Published May/1977
• Friction Welding Alloy 800
  BY K. H. Holko
  Published May/1977
• Weldability of Hot Isostatically Pressed Prealloyed Titanium 6AI-4V Powder
  BY M. A. Greenfield, R. F. Geisendorfer, D. K. Haggard and L. P. Clark
  Published May/1977
• Creep Crack Growth in a Type 316 Stainless Steel Weld Metal
  BY J. R. Haigh
  Published May/1977
• Melting Phenomena in Solid State Welding Processes
  BY H. Kreye
  Published May/1977

• Development of a Direct Aging Filler Metal for Welding 15-5PH/17- 4PH Steel
  BY T. J. Bosworth and A. J. Zvanut
  Published June/1977
• An Investigation of Hot Cracking in 5083-O Aluminum Alloy Weldments
  BY J. C. Lippold, E. F. Nippes and W. F. Savage
  Published June/1977
• Weldability of a Ni-Cu-Cb Line-Pipe Steel
  BY J. Gordine
  Published June/1977
• Analysis of a High Manganese Stainless Steel Weldability Problem
  BY G. S. Mills
  Published June/1977
• Calculation of Strength of Single-Lap Shear Specimen
  BY E. Lugscheider, H. Reiman and O. Knotek
  Published June/1977

• Cause and Prevention of 12% Chromium Steel Fillet Weld Cracks
  BY H. R. Castner
  Published July/1977
• The Weldability of Some Arctic-Grade Line-Pipe Steels
  BY J. Gordine
  Published July/1977
• Welding Flux Cored Electrodes in N2-CO2 and N2-Ar Atmospheres
  BY Leonard B. Sis
  Published July/1977
• Spot Weldability of Mn-Mo-Cb, V-N, and SAE 1008 Steels
  BY J. M. Sawhill, Jr., H. Watanabe and J. W. Mitchell
  Published July/1977

• Fatigue Resistance of Oxygen Cut Steel
  BY R. Plecki, R. Yeske, C. Altstetter and F. V. Lawrence, Jr
  Published August/1977
• A Study of Hydrogen Cracking in Underwater Steel Welds
  BY H. Ozaki, J. Naiman and K. Masubuchi
  Published August/1977
• The Mechanism of Expulsion in Weldbonding of Anodized Aluminum
  BY K. C. Wu
  Published August/1977
• Effect of Minor Elements on Hot-Cracking Tendencies of Inconel 600
  BY W. F. Savage, E. F. Nippes and C. M. Goodwin
  Published August/1977
• Weldability of Forged AISI 4130 and 1020 Mn Steels
  BY R. A. Douty and H. Schwartzbart
  Published August/1977

• Effect of Inadequate loint Penetration on Fatigue Resistance of High-Strength Structural Steel Welds
  BY Y. Tobe and F. V Lawrence, Jr.
  Published September/1977
• The Influence of Cooling Rate and Composition on Weld Metal Microstructures in a C/Mn and a HSLA Steel
  BY A. G. Glover, J. T. McGrath, M. J. Tinkler and G.C. Weatherly
  Published September/1977
• The Effect of Wire Feed Speed on the Structure in Electroslag Welding of Low Carbon Steel
  BY M. Solari and H. Biloni
  Published September/1977
• Inclusion Formation in Arc Welding
  BY G. Thewlis and D. R. Milner
  Published September/1977
• Technical Note: Ferrite Stability at Elevated Temperature in Austenitic Stainless Steel Weld Metals
  BY J. E. Spruiell, W. E. Fett and C. D. Lundin
  Published September/1977

• The Skylab Brazing Experiment
  BY T. A. Siewert, R. H. Heine, C. M. Adams, Jr., and J. R. Williams
  Published October/1977
• Clad Solder for Semiconductor Devices
  BY S. Mitsugi, D. Oelschlagel, K. Yamaguchi, K. Yamaji and K. Konishi
  Published October/1977
• Brazed Nickel/Columbium Dissimilar Metal Pipe Joints for 720 C Service
  BY C. K. Watson and T. J. Moore
  Published October/1977
• Metallurgical Studies of the Vacuum Brazing of Aluminum
  BY W. A. Anderson
  Published October/1977
• Investigations on the Capillary Flow of Brazing Filler Metal BNi5
  BY E. Lugscheider and K. Iverson
  Published October/1977
• Development of a Composite Brazing Wire
  BY H. Kawano, D. Oelschlagel and K. Yamaji
  Published October/1977

• A New Dimension in Resistance Welding Electrode Materials
  BY A. V. Nadkarni and E. P. Weber
  Published November/1977
• Intergranular Attack in Welded Stress-Corrosion Resistant Stainless Steel
  BY J. Honeycombe and T.G. Gooch
  Published November/1977
• Development of An Improved Stainless Steel to Ferritic Steel Transition Joint
  BY J. F. King, M. D. Sullivan and G. M. Slaughter
  Published November/1977
• Solderability of Thick Film Substrate
  BY T. Yoshiya and A. Tamura
  Published November/1977
• Static Contact Resistance of Series Spot Welds
  BY W.F. Savage, E.F. Nippes and F.A. Wassell
  Published November/1977

• Effects of Process Parameters on Thermal Distribution During Electroslag Welding
  BY P. J. Konkol
  Published December/1977
• An Investigation of Potential Health Hazards of Arc Welding Fume Growth with Time
  BY D. E. Clapp and R. J. Owen
  Published December/1977
• Fatigue-Crack Propagation Behavior of Several Pressure Vessel Steels and Weldments
  BY L. A. James
  Published December/1977
• Stress Gradient Correction Factor for Stress Intensity at Welded Stiffeners and Cover Plates
  BY N. Zettlemoyer and J. W. Fisher
  Published November/1977