RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1970 1971 1972 1973 1974 1975 1976 1977 1978 1979

• Fracture Toughness of Electroslag Welded A537G Steel
  BY J. B. des Ramos, A. W. Pense and R. D. Stout
  Published January/1976
• Borocarbide Precipitation in the HAZ of Boron Steel Welds
  BY J. H. Devletion
  Published January/1976
• Thermodynamics of Air-Operating Flux Cored Electrodes and an Analysis of Weld Toughness
  BY H. I. Kaplan and D. C. Hill
  Published January/1976
• Microstructural Control of Thin-Film Diffusion-Brazed Titanium
  BY R. R. Wells
  Published January/1976
• Weldability of a New High Strength Low Alloy Cast Steel
  BY N. Kenyon and D. L. Minard
  Published January/1976

• Ductility and Toughness of Stainless Steel Welds
  BY J. M. Sawhill, Jr. and A. P. Bond
  Published February/1976
• Reheat Cracking Susceptibility of Some 2Cr-Mo Submerged Arc Weld Metals
  BY W. K. C. Jones
  Published February/1976
• Vibrational Residual Stress Relief in a Plain Carbon Steel Weldment
  BY S. Weiss, G. S. Baker and R. D. Das Gupta
  Published February/1976
• Electron Beam Welding Spike Suppression Using Feedback Control
  BY P. Tews, P. Pence, J. Sanders, E. R. Funk and R. C. McMaster
  Published February/1976

• Deoxidation Practice for Mild Steel Weld Metal
  BY D. J. Widgery
  Published March/1976
• Operating Characteristics of the Submerged Arc Process
  BY B. G. Renwick and B. M. Patchett
  Published March/1976
• Stress Concentrations in Double Welded Partial Joint Penetration Butt Welds
  BY L. W. Zachary and C. P. Burger
  Published March/1976
• Fracture Mechanics Testing Methods for Assessing Susceptibility to Stress Relief Cracking
  BY K. Purazrang
  Published March/1976

• A Field Weldability Test for Pipeline Steels
  BY R. D. Stout, R. Vasudevan and A. W. Pense
  Published April/1976
• Hydrogen Cracking in Weld Metals
  BY M. McParlan and B. A. Graville
  Published April/1976
• Tensile Properties of A514 Steel Butt Joints Containing Cluster Porosity
  BY E. M. Honig, Jr. and K. W. Carlson
  Published April/1976
• An Arc Blow Simulator
  BY D. J. Kotecki and P. A. Tews
  Published April/1976

• Influence of Inadequate Joint Penetration on Tensile Behavior of A514 Steel Welds
  BY F. V. Lawrence and E. P. Cox
  Published May/1976
• Field Study of Potential Ultraviolet Exposure from Arc Welding
  BY S. W. Horstman, E. A. Emmett and T. E. Kreichelt
  Published May/1976
• Moisture Loss and Regain by Some Basic Flux Covered Electrodes
  BY B. Chew
  Published May/1976
• Experiences with HAZ Cold Cracking Tests on a C-Mn Structural Steel
  BY W. P. Campbell
  Published May/1976

• The Fissure Bend Test
  BY C. D. Lundin, W. T. DeLong and D. F. Spond
  Published June/1976
• A Study of the Submerged Arc Welding of Titanium
  BY D. C. Hill and C. L. Choi
  Published June/1976
• Techniques and Standards for Measuring Ferrite in Austenitic Stainless Steel Welds
  BY A. W. Brewer and R. L. Moment
  Published June/1976
• Microsegregation in 70Cu-30Ni Weld Metal
  BY W. F. Savage, E. F. Nippes and T. W. Miller
  Published June/1976
• Welding a Cast Silicon Hardened Stainless Maraging Steel
  BY E. P. Sadowski
  Published June/1976

• Microsegregation in Partially Heated Regions of 70Cu-30Ni Weldments
  BY W. F. Savage. E. F. Nippes and T. W. Miller
  Published July/1976
• Study of Creep Embrittlement of 21/4Cr-1Mo Steel Weld Metal
  BY R. A. Swift and H. C. Rogers
  Published July/1976
• Fundamentals of Ultrasonic Soldering
  BY J. N. Antonevich
  Published July/1976
• Laser Welding of Dissimiliar Metals: Titanium to Nickel
  BY J. Seretsky and E. R. Ryba
  Published June/1976

• Solidification Mechanisms in Fusion Welds
  BY W. F. Savage, E. F. Nippes and J. S. Erickson
  Published August/1976
• Temperature Measurements in a Free Burning Arc
  BY S. S. Glickstein
  Published August/1976
• Electron Beam Welding of Dissimilar Metals
  BY G. Metzger and R. Lison
  Published August/1976
• Some Improvements in Self-Shielded Flux Cored Electrodes for Arc Welding
  BY O. Morigaki, T. Matsumoto and Y. Takemoto
  Published August/1976
• Calculation of Thermoelastic Deformations and Stresses in Two-Component Structures
  BY J. F. Stelzer
  Published August/1976

• Microstructure and Tensile Properties of 2'/iCr-1Mo Steel Weldments with Varying Carbon Contents
  BY R. L. Klueh and D. A. Canonico
  Published September/1976
• A Study of Weld Interface Phenomena in a Low Alloy Steel
  BY W. F. Savage, E. F. Nippes and E. S. Szekeres
  Published September/1976
• Selected Mechanical Properties of Inconel 718 and 706 Weldments
  BY R. A. Mayor
  Published September/1976
• Hydrogen Induced Cold Cracking in a Low Alloy Steel
  BY W. F. Savage, E. F. Nippes and E. S. Szekeres
  Published September/1976

• Development and Evaluation of a Ni-Cr-P Brazing Filler Metal
  BY G. E. Sheward and G. R. Bell
  Published October/1976
• Parameters Evaluated in Long Cycle Aluminum Vacuum Brazing
  BY E. B. Gempler
  Published October/1976
• Effect of Fluxes on Steel Joints Brazed with Silver Base Filler Metal
  BY D. E. Schillinger and H. J. Addison, Jr
  Published October/1976
• Measurement of the Ultrasonic Effect in an Ultrasonic Solder Bath
  BY A. Lystrup
  Published October/1976
• Brazing Filler Metals Based on Reacting Ni-Cr-B-Si Alloys
  BY O. Knotek and E. Lugscheider
  Published October/1976
• On Co-Ni-Cr-B Filler Metals for High Temperature Brazing
  BY E. Lugscheider, O. Knotek and K. H. Battenfeld
  Published October/1976
• Mechanical Strength of Selected Soldered Joints and Bulk Solder Alloys
  BY C. J. Thwaites and W. B. Hampshire
  Published October/1976
• Room Temperature Aging Properties of Some Solder Alloys
  BY B. T. Lampe
  Published October/1976

• Material Variables Affecting Lamellar Tearing Susceptibility in Steels
  BY S. Ganesh and R. D. Stout
  Published November/1976
• The Nature and Morphology of Fissures in Austenitic Stainless Steel Weld Metals
  BY C. D. Lundin and D. F. Spond
  Published November/1976
• Hydrogen Induced Cracking in HY-80 Steel Weldments
  BY W. F. Savage, E. F. Nippes and H. Homma
  Published November/1976
• Influence of Current Pulses During Submerged Arc Welding
  BY P. C. Gupta, D. Rehfeldt and F. Erdmann-Jesnitzer
  Published November/1976

• Creep-Rupture Properties of 2V4Cr-1Mo Steel Weldments with Varying Carbon Content
  BY R. J. Klueh and D. A. Canonico
  Published December/1976
• Electroslag Welding of Heavy Section 2 1/4 Cr-1Mo Steel
  BY M. Okumura, M Kumagai, H. Nakamura and K. Kohira
  Published December/1976
• Hydrogen Induced Cracking During Implant Testing of Alloy Steels
  BY W. F. Savage, E. F. Nippes, and J. M. Sawhill, Jr
  Published December/1976
• An Investigation of the Thermal Response of Stationary Gas Tungsten Arc Welds
  BY E. Friedman and S. S. Glickstein
  Published December/1976