RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1970 1971 1972 1973 1974 1975 1976 1977 1978 1979

• Properties of Welds in Low Carbon Mn-Mo-Cb Line Pipe Steels
  BY J. M. Sawhill, Jr. and T. Wada
  Published January/1975
• Purging with Nitrogen in the Welding of Austenitic Stainless Steel
  BY C. V. Shirwaikar and G. P. Reddy
  Published January/1975
• A Hydrostatic Model of Solder Fillets
  BY T. Y. Chu
  Published January/1975
• Weld Thermal Efficiency of the GTAW Process
  BY R. W. Niles and C. E. Jackson
  Published January/1975

• Diagnostic Studies of the GTAW Arc Part 1 - Observational Studies
  Published February/1975
• Effect of Boron Content on Carbon Steel Welds
  Published February/1975
• Hydrogen Embrittlement of Tough Pitch Copper by Brazing
  Published February/1975
• Toward Better Standards for Field Welding of Gas Pipelines
  Published February/1975

• Welding of an Advanced High Strength Titanium Alloy
  Published March/1975
• Diagnostic Studies of the GTAW Arc, Part 2
  Published March/1975
• Influence of Chemical Composition on Mild Steel Weld; Metal Notch Toughness
  Published March/1975
• Effect of Porosity on 5086-H116 Aluminum Alloy Welds
  Published March/1975
• Heat Transfer in Plasma-Arc Welding
  Published March/1975

• Diffusion Welding Commercial Bronze to Titanium Alloy
  Published April/1975
• Investigation of Alloy 600 Welding Parameters
  Published April/1975
• A New Diagram for the Application of Welding Theories
  Published April/1975
• High Strain Rate Tensile Properties of Type 308 SMA Weld Metal
  Published April/1975

• Analysis of Atmospheric Electron Beam Welding
  BY J. H. Fink
  Published May/1975
• Anisotropy of Fatigue Crack Propagation in Aluminum Alloy Butt Welded Joints
  BY S. M. El-Soudani and R. M. Pelloux
  Published May/1975
• Effect of Aluminum on HAZ Cold Cracking in C-Mn Steels
  BY W. P. Campbell
  Published May/1975
• Effect of Cb on HAZ Ductility in Constructional HT Steels
  BY N. E. Hannerz
  Published May/1975

• Effects of Notch Acuity and Side Grooving on Fracture Toughness
  Published June/1975
• Fundamental Research on Underwater Welding
  Published June/1975
• Weldability of High N, High Mn Austenitic Stainless Steel
  Published June/1975
• Effect on Sulfur on Through-Thickness Properties of C-Mn Steel Plates
  Published June/1975

• Particulate Fume Generation in Arc Welding Processes
  Published July/1975
• Performance of the MnO-Si02-CaO System as a Welding Flux
  Published July/1975
• Dynamic Fracture Instability in Welded 17-7PH Type Steel
  Published July/1975
• Effects of Notch Acuity and Side Grooving on Fracture Toughness
  Published June/1975
• Electroslag Welding of High Nickel Alloys
  Published June/1975

• Ferrite-Fissuring Relationship in Austenitic Stainless Steel
  Published August/1975
• Elevated Temperature Fatigue of Pressure Vessel Steels
  Published August/1975
• Cracking in Restrained EB Welds in Steels
  Published August/1975
• Irradiation Effects on SMAW Deposited Type 308 S/S
  Published August/1975
• Elevated Temperature Weld Behavior in Nuclear Design
  Published August/1975
• Shear Strength of Brazed and Soldered Joints
  Published August/1975

• Weldability of High Performance Alloys in Thin Sheet Form
  Published September/1975
• Implant Test Ranks Cr-Mo Hydrogen Cracking Resistance
  Published September/1975
• Effect of Porosity on Elevated Temperature Fatigue Properties of 2-l/4Cr-lMo Steel Weldments
  Published September/1975
• Mechanism of Solid State Pressure Welding
  Published September/1975
• Joint Strength of Heavy Plates with Lower Strength Weld Metal
  Published September/1975

• Weldability of High Performance Alloys in Thin Sheet Form
  Published September/1975
• Implant Test Ranks Cr-Mo Hydrogen Cracking Resistance
  Published September/1975
• Effect of Porosity on Elevated Temperature Fatigue Properties of 2-l/4Cr-lMo Steel Weldments
  Published September/1975
• Mechanism of Solid State Pressure Welding
  Published September/1975
• Joint Strength of Heavy Plates with Lower Strength Weld Metal
  Published September/1975

• Relationships Among Brazing Defects and Brazing Conditions
  BY D. E. Schillinger and H. J. Addison, Jr.
  Published October/1975
• Mechanisms of Spreading and Oxide Displacement by BCuP-2 Brazing Filler Metal
  BY J. F. Rasmussen, D. L. Klarstrom and S. Weiss
  Published October/1975
• Brazing of Stainless Steel Heat Exchangers for Gas Turbine Applications
  BY I. Amato, P. G. Campbell and G. Fenoglio
  Published October/1975
• Cracking Susceptibility and Microstructure of Ni-Cr20-Ti-AI Brazed Joints
  BY U. Draugelates, B. Wielage and K. -H. Hartman
  Published October/1975
• Low Temperature Large-Area Brazing of Damage Tolerant Titanium Structures
  BY R. R. Wells
  Published October/1975
• Influence of Flux,Substrate and Solder Composition on Solder Wetting
  BY J. F. Shipley
  Published October/1975
• Reliability of Soldered Connections in Single Ended Circuit Components
  BY M. Kobayashi
  Published October/1975
• Lead Alloys for High Temperature Soldering of Magnet Wire
  BY W. G. Bader
  Published October/1975
• Effect of Low Frequency Thermal Cycling on the Crack Susceptibility of Soldered Joints
  BY E. R. Bangs and R. E. Beal
  Published October/1975

• Computation of Temperatures in Actual Weld Designs
  Published November/1975
• Embrittlement in Weld Strain-Affected Zone in Carbon Steel
  Published November/1975
• Keyhole Stability in Plasma Arc Welding
  Published November/1975
• Weldability of Three Forms of CVD Tungsten
  Published November/1975
• Repair of Rotating Air-Sealing Components for Gas Turbine Engines
  Published November/1975

• 1975 Adams Lecture: The Uses of Welded Materials in Nuclear Power Engineering
  BY R. W. Nichols
  Published December/1975
• A Method for Specifying Hot Isostatic Pressure Welding Parameters
  BY W. A. Bryant
  Published December/1975
• Resistance Spot Welding of High Contact-Resistance Surfaces for Weldbonding
  BY K. C. Wu
  Published December/1975
• Evaluation of Post-Solder Flux Removal
  BY J. Brous
  Published December/1975