RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1970 1971 1972 1973 1974 1975 1976 1977 1978 1979

• 1972 Adams Lecture: Weld Metal Property Selection and Control
  BY J. Heuschkel
  Published January/1973
• Influence of Weld Bead Area on Weld Metal Mechanical Properties
  BY B. L. Schultz and C. E. Jackson
  Published January/1973
• Diffusion Welding of Beryllium: Part II - The Role of the Microalloying Elements
  BY T. J. Bosworth
  Published January/1973

• Static and Dynamic Behavior of Welded Aluminum Beams
  BY M. L. Sharp
  Published February/1973
• Temper Embrittlement of Pressure Vessel Steels
  BY R. A. Swift and J. A. Gulya
  Published February/1973
• Technical Note: Calibration Procedure for Instruments to Measure the Delta Ferrite Content of Austenitic Stainless Steel Weld Metal
  BY W. T. DeLong
  Published February/1973
• Fine Grained Weld Structures
  BY W. A. Petersen
  Published February/1973
• Acoustic Emission Weld Monitoring of Nuclear Components
  BY D. M. Romrell
  Published February/1973
• Lamellar Tearing and the Slice Bend Test
  BY M. L. Drury and J. E. M. Jubb
  Published February/1973

• Effect of Welding Variables on Aluminum Alloy Weldments
  BY R. J. Brungraber and J. G. Nelson
  Published March/1973
• Effects of Composition on Embrittlement of Austenitic Stainless Steels
  BY F. C. Hull
  Published March/1973
• Effect of Process Variables on Partial Penetration Electron Beam Welding
  BY C. W. Weidner and L. E. Schuler
  Published March/1973
• Microstructural Observations of Arc Welded Boron-Aluminum Composites
  BY J. R. Kennedy
  Published March/1973
• Electroslag Welding of Boiler Drums in India
  BY S. Naganathan, A. Sreenivaslu and A. S. N. Rao
  Published March/1973
• Short Time Aging Characteristics of Inconel X-750,
  BY A. W. Dix and W. F. Savage
  Published March/1973
• Flange-to-Web Connection Requirements on Beams with Corrugated Webs
  BY D. R. Sherman and M. Fisher
  Published March/1973

• Embrittlement of 2 1/4 Cr-1 Mo Steel Weld Metal by Postweld Heat Treatment
  BY R. A. Swift and H. C. Rogers
  Published April/1973
• A Metallurgical Approach to Cracked Solder Joints
  BY D. T. Novik
  Published April/1973
• Experiments on Unstiffened Thin Web Girders
  BY C. Chern and V. Kunapongsiri
  Published Apri;/1973
• Mechanical Properties of Weld, Base Metal and Coated Columbium Alloy Cb 752
  BY A. A. Tavassoli
  Published April/1973
• Crack Propagation Behavior in Type 304 Stainless Steel Weldments at Elevated Temperature
  BY L. A. James
  Published April/1973
• Localized Hydrogen in Titanium Welds
  BY P. N. Adler, J. Kennedy and F. G. Satkiewicz
  Published April/1973
• Exploratory Study of a Fluxless Aluminum Brazing Process for Beryllium
  BY R. J. Juntz, W. G. King, G. Tardiff, Jr. and E. F. Westlund
  Published April/1973

• Delta Ferrite and Martensite Formation in Stainless Steels
  BY F. C. Hull
  Published May/1973
• Precipitation in EB Welded Beryllium Ingot Sheet
  BY F. J. Fraikor, G. K. Hicken and V. K. Grotskybr /> Published May/1973
• Estimation of Fatigue-Crack Propagation Life in Butt Welds
  BY F. V. Lawrence
  Published May/1973
• Fatigue-Crack Propagation in Butt Welds Containing Joint Penetration Defects
  BY F. V. Lawrence and W. H. Munse
  Published May/1973
• Solidification Structure and Tensile Properties of 2014 Aluminum Alloy Welds
  BY J. N. Lanzafame and T. Z. Kattamis
  Published May/1973

• Corrosion of BAg Brazed Joints in Stainless Steel
  BY I. Kawakatsu
  Published June/1973
• Structure and Fatigue Strength of 5456 Aluminum Alloy GTA Welds
  BY R. H. Juers and T. Z. Kattamis
  Published June/1973
• On the Effects of Postweld Heat Treatment
  BY T. Toyooka and K. Terai
  Published June/1973
• Notch Toughness of Austenitic Stainless Steel Weldments with Nuclear Irradiation
  BY J. R. Hawthorne and H. E. Watson
  Published June/1973
• Creep-Rupture Properties of 2 1/4 CrMo Weld Deposits
  BY A. D. Batte and M. C. Murphy
  Published June/1973
• Corrosion of Incoloy 800 and Nickel Base Alloy Weldments in Steam
  BY J. P. Hammond, P. Patriarca, G. M. Slaughter and W. A. Maxwell
  Published June/1973

• The Ferrite Content of Austenitic Stainless Steel Weld Metal
  BY C. J. Long and W. T. DeLong
  Published July/1973
• Formation of Plastic Strains During Welding of Aluminum Alloys
  BY Lytle Johnson
  Published July/1973
• Effects of Electrode Coverings on Elevated Temperature Properties of Austenitic Stainless Steel Weld Metal
  BY N. C. Binkley, G. M. Goodwin and D. G. Harman
  Published July/1973
• Interaction of High Temperature Strength and Weldability
  BY G. G. Lessmann, R. E. Gold and R. T. Begley
  Published July/1973
• Mechanical Properties of Weld, Base Metal and Coated Columbium FS85
  BY A. A. Tavassoli
  Published July/1973

• Experiments on Castellated Steel Beams
  BY M. U. Hosain and W. G. Speirs
  Published August/1973
• An Accurate Method for Determining Electron Beam Welding Voltages
  BY R. D. Dixon
  Published August/1973
• Properties of Weld Metal in a Lead-Calcium Alloy
  BY W. W. Canary and C. D. Lundin
  Published August/1973
• Effect of Heat Input on Properties of Inconel Filler Metal 82 Weld Deposits
  BY J. C. Thornley
  Published August/1973
• Ultrasonic Closure Welding of Small Aluminum Tubes
  BY C. L. Estes and P. W. Turner
  Published August/1973
• Resistance Diffusion Bonding Boron/Aluminum Composite to Titanium
  BY M. S. Hersh
  Published August/1973

• Weld Cooling Rates and Heat-Affected Zone Hardness in a Carbon Steel
  BY B. A. Graville
  Published September/1973
• Prediction of Weld Metal Hydrogen Levels Obtained Under Test Conditions
  BY B. Chew
  Published September/1973
• Influence of Thermal Cutting and Its Quality on the Fatigue Strength of Steel
  BY F. Goldberg
  Published September/1973
• An Investigation of Pulsed GTA Welding Variables
  BY R. E. Leitner, G. H. McElhinney and E. L. Pruitt
  Published September/1973
• HAZ Thermocycle and Structure Simulation
  BY R. A. Mueller, D. G. Howden and F. B. Simmons
  Published September/1973
• Weldability and Weld Capabilities of a New Precipitation-Hardenable Alloy
  BY L. P. Myers, C. V. Prestowitz and H. C. Campbell
  Published September/1973

• Aluminum Brazed Titanium Honeycomb Sandwich Structure - A New System
  BY S. D. Elrod, D. T. Lovell, and R. A. Davis
  Published October/1973
• Procedure Development for Brazing Inconel 718 Honeycomb Sandwich Structures
  BY W. Blair
  Published October/1973
• Some Considerations on Solder Flow-Up Into Plated-Through Holes
  BY A. Tamura, Y. Tachibana and S. Itakura
  Published October/1973
• Soldering and Brazing of Advanced Metal-Matrix Structures
  BY A. R. Robertson, M. F. Miller and C. R. Maikish
  Published October/1973
• Failure Mechanism of Tin Plating in the Solder Industry
  BY A. Audelo
  Published October/1973
• Corrosion of Solders in Automobile Coolant Systems
  BY W. L. Falke, A. E. Schwaneke and A. Y. Lee
  Published October/1973
• Development of Corrosion Resistant Filler Metals for Brazing Molybdenum
  BY N. C. Cole, R. W. Gunkel and J. W. Kogere
  Published October/1973
• Brazeability of Ni-Cr Heat Resistant Cermets on Stainless Steel
  BY Amato, P. Cappelli and F. Baudrocco
  Published October/1973

• A Quantitative Weldability Test for Susceptibility to Lamellar Tearing
  BY R. P. Oates and R. D. Stout
  Published November/1973
• Penetration Welding With Lasers
  BY D. T. Swift-Hook and A. E. F. Gick
  Published November/1973
• Welding E-Brite 26-1 to Other Alloys
  BY R. Lowrie
  Published November/1973
• Crack Growth in the Vicinity of Welds
  BY N. J. I. Adams
  Published November/1973
• An Improved Diffusion Welding Technique for TD-NiCr Sheet
  BY K. H. Holko
  Published November/1973
• Postweld Aging of a Metastable Beta Titanium Alloy
  BY M. A. Greenfield and C. M. Pierce
  Published November/1973

• Grain Refining Effect of Boron in Carbon Steel Welds
  BY J. H. Devletion and R. W. Heine
  Published December/1973
• Property Evaluation of Electroslag Remelted A533B Plate
  BY R. A. Swift and J. A. Gulya
  Published November/1973
• Effect of Notch Acuity on the Fracture Toughness of Three Low Alloy High Yield Strength Steels
  BY G. Jolley, I. M. Kilpatrick and R. Main
  Published December/1973
• Cobalt Base Surfacing of Inconel 718
  BY R. A. Douty and H. Schwartzbart
  Published December/1973
• Pulsed DC High Frequency GTA Welding of Aluminum Plate
  BY G. R. Stoeckinger
  Published December/1973
• Effects of Furnace Atmosphere on Heat Treat Cracking of René 41 Weldments
  BY A. T. D'Annessa and J. S. Owens
  Published December/1973