RESEARCH PAPERS

1970s   1980s   1990s   2000s   2010s

1970 1971 1972 1973 1974 1975 1976 1977 1978 1979

• The Varestraint Test for Refractory Metals
  BY G. G. Lessmann and R. E. Gold
  Published Jan/1971
• Weld Cracking and Mechanical Properties of 17% Chromium Steel Weldment
  BY T. Nishio, T. Ohmae, T. Yoshida and Y. Muira
  Published Jan/1971
• Micro Hot Tearing in the Heat-Affected Zone of High Strength Steels
  BY A. G. Vinckier
  Published Jan/1971
• Welding 99.9999 Percent Pure Aluminum
  BY D. L Cheever, D. G. Howden and R. E. Gold
  Published Jan/1971
• Eastern Europe Welding Research News
  Published Jan/1971
• The Measurement of Residual Stresses
  BY A. G. Cepolina and D. A. Canonico
  Published Jan/1971
• Strength Determination of Brazed Joints
  BY M. D. Walsh, W. Bryzik, M. C. Young and C. O. Smith
  Published Jan/1971
• Technical Note: Reduced Heat-Affected Zone Cracking and Improved Base Metal Impacts Through Sulfide Control with Rare Earth Additions
  BY William G. Wilson
  Published Jan/1971
• Technical Note: Sulfur and Phosphorus in Low Alloy Steel Welds Containing Up To 6% Nickel
  BY N. Kenyon and L. Epstein
  Published Jan/1971

• Weldability of Constructional Steels — USA Viewpoint
  BY W. D. Doty
  Published February/1971
• The Strength Toughness Properties of Welds in Plates of Commercial Titanium Alloys
  BY L. E. Stark
  Published February/1971
• Tensile Properties of Hastelloy N Welded After Irradiation
  BY H. E. McCoy, R. W. Gunkel and G. M. Slaughter
  Published February/1971
• Fatigue of Aluminum Alloy Welded Joints
  BY N. L. Person
  Published February/1971
• U. S. S. R. Welding Research News
  Published February/1971
• Heat-Resistant Ceramic-to-Metal Seals
  BY J. T. Klomp
  Published February/1971

• Principles of Fracture Safe Design — Part I
  BY William S. Pellini
  Published March/1971
• Anisotropy and Weldability
  BY J. Heuschkel
  Published March/1971
• One-Run Versus Multi-Run Welds
  BY Walter Soete
  Published March/1971
• The Forge Phase of Friction Welding
  BY T. Rich and R. Roberts
  Published March/1971

• Principles of Fracture Safe Design — Part II
  BY W. S. Pellini
  Published April/1971
• Motion in the Weld Pool in Arc Welding
  BY R. A. Woods and D. R. Milner
  Published April/1971
• Heat-Affected Zone Infiltration By Dissimilar Liquid Weld Metal
  BY S. J. Matthews and W. F. Savage
  Published April/1971
• Spreading and Aggressive Effects By Nickel-Base Brazing Filler Metals on Stainless Steel
  BY A. Amato, F. Baudrocco and M. Ravizza
  Published April/1971
• Multipass Electron Beam Welding For Controlled Penetration
  BY E. H. Bradburn, R. A. Huber and P. W. Turner
  Published April/1971

• The Mechanism of Stress Relief Cracking in 2V4Cr-lMo Steel
  BY Robert A. Swift
  Published May/1971
• Re-Heat Cracking in High Nickel Alloy Heat-Affected Zones
  BY D. McKeown
  Published May/1971
• Technical Note: Fatigue Crack Propagation in Zircaloy-2 Weld Metal
  BY D. A. Ferrill
  Published May/1971
• The Fatigue Properties of a Welded Low Alloy Steel
  BY M. R. Baren and R. P. Hurlebaus
  Published May/1971
• Effect of Phase Control During Flashing on Flash Weld Defects
  BY J. F. Sullivan and W. F. Savage
  Published May/1971
• Development and Evaluation of a Modulated Power Control for Fusion Welding
  BY F. Reinks and R. C. Ashauer
  Published May/1971
Strength of Fillet Welds as a Function of Direction of Load
BY L. J. Butler and G. L. Kulak
Published May/1971

• Factors Affecting the Strength of Multipass Low-Alloy Steel Weld Metal
  BY Borris M. Krantz
  Published June/1971
• Joining Sintered Steel to Wrought Steel Using Various Welding Process
  BY J. F. Hinrichs, P. W. Ramsey, and M. W. Zimmermann
  Published June/1971
• Factors Influencing Strain-Age Cracking in Inconel X-750
  BY A. W. Dix and W. F. Savage
  Published June/1971
• Development of Brazed Austenitic/ Ferritic Steel Steam Pipe Joints for Turbines
  BY H. R. Heap and C. C. Riley
  Published June/1971
• Some Observations on the Stress Rupture Ductility of Welds
  BY N. Kenyon
  Published June/1971

• Improved Brazing Methods for Tungsten Carbide Tool Bits
  BY R. G. Gilliland and C. M. Adams, Jr.
  Published July/1971
• Development of Brazing Filler Metals for Zircaloy
  BY R. E. Beal and Z. P. Saperstein
  Published July/1971
• Microsegregation in Autogenous Hastelloy X Welds
  BY W. F. Savage and B. M. Krantz
  Published July/1971
• Defects in 2021 Aluminum Alloy Welds
  BY Thomas M. Morton
  Published July/1971
• Shear in Steel Beam-to-Column Connections
  BY D. J. Fielding and J. S. Huang
  Published July/1971
• Computer Differentiation of Mbssbauer Spectra
  BY O. W. Albritton and J. M. Lewis
  Published July/1971

• Welding Parameters, Thick Plates and Column Strength
  BY J. Brozzetti, G. A. Alpsten and L. Tall
  Published August/1971
• Basic Properties of Thin-Film Diffusion Brazed Joints in Ti-6AI-4V
  BY A. H. Freedman
  Published August/1971
• A Critical Review of Weld Metal Embrittlement
  BY R. A. Swift and H. C. Rogers
  Published August/1971
• Stress Relief Cracking in Pressure Vessel Steels
  BY A. W. Pense, E. J. Galda and G. T. Powell
  Published August/1971

• Friction Welding of Titanium Alloys
  BY C. G. Nessler, D. A. Rutz, R. D. Eng and P. A. Vozzella
  Published September/1971
• Resistance NOR-Ti-BOND Joining of Titanium Shapes
  BY J. Brozzetti, G. A. Alpsten and L. Tall
  Published September/1971
• Brazing Filler Metal Evaluation for an Aircraft Gas Turbine Engine Application
  BY R. P. Schaefer, J. E. Flynn and J. R. Doyle
  Published September/1971
• Heat Treatments for Improving the Weldability and Formability of Udimet 700
  BY D. S. Duvall and W. A. Owczarski
  Published September/1971
• Weldability of a New Ferritic Stainless Steel
  BY K. C. Dorschu
  Published September/1971
• Weldability of Tungsten and Its Alloys
  BY N. C. Cole, R. G. Gilliland and G. M. Slaughter
  Published September/1971

• Friction Welding of Titanium Alloys
  BY F. G. Nelson and Marshall Holt
  Published October/1971
• The Mechanical Properties of Welds in Zinc Coated Steel
  BY E. N. Gregory
  Published October/1971
• Bend Ductility of Columbium Alloys WC3015 and Cb752
  BY A. A. Tavassoli
  Published October/1971
• The Spreadability of Automotive Solders
  BY H. W. Kerr
  Published October/1971
• Mechanical Behavior and Weldability of a High Chromium Ferritic Stainless Steel as a Function of Purity
  BY H. W. Kerr
  Published October/1971
• New Method for Evaluating Strength and Ductility of Brazed Joints
  BY E. Klausnitzer
  Published October/1971

• Observations of Exploding Droplets in Pulsed-Arc GMA Welding
  BY M. B. C. Quigley and J. M. Webster
  Published November/1971
• Effect of Anode Composition on Tungsten Arc Characteristics
  BY Theodore F. Chase, Jr. and Warren F. Savage
  Published November/1971
• The Effects of Pulsed Gas Metal-Arc Welding Parameters on Weld Cooling Rates
  BY Boris M. Krantz and Vincent D. Coppolecchia
  Published November/1971
• Some Problems in Welding Inconel 718
  BY J. Gordine
  Published November/1971
• Dye Penetrant Indications Caused by Superficial Surface Defects in 2014 Aluminum Alloy Welds
  BY R. G. Hocker and K. R. Wilson
  Published November/1971

• Cracking in Welded Steam Pipe
  BY J. A. Isasi, R. C. Bates and J. Heuschkel
  Published December/1971
• Effect of Heat Input on Welds in Aluminuum Alloy 7039
  BY R. A. Kelsey
  Published December/1971
• Correlation Between Boron/Aluminum Sheet Quality and Resistance Weld Quality and Strength
  BY M. S. Hersh
  Published December/1971
• The Effect of Temperature and Stress on Tin-Rich Solder Alloys
  BY Louis Zakraysek
  Published December/1971
• Nondestructive Examination of PVRC Plate-Weld Specimen 201
  BY PVRC Subcommittee
  Published December/1971