Technical Errata
 TECHNICAL
Mission Statement
To provide for the dissemination of leading new technologies or applications to the welding industry worldwide. At the same time, AWS will continue to maintain a leadership position in the production of codes, specifications, guides, recommended practices and books related to welding and joining.

Current Standards' Errata
AWS A2.1 1998 Standard Symbols for Welding, Brazing, and Nondestructive Examination
AWS A3.0:2001 Standard Welding Terms and Definitions
AWS A5.1/A5.1M:2004 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
AWS A5.2-92 Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
AWS A5.7-84R Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes
AWS A5.8M/A5.8:2004 Specification for Filler Metals for Brazing and Braze Welding
AWS A5.9/A5.9M:2006 Specification for Bare Stainless Steel Welding Electrodes and Rods
AWS A5.12M/A5.12:2009 Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting
AWS A5.14/A5.14M:2009 Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
AWS A5.16/A5.16M:2013 Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods
ANSI/AWS A5.23/A5.23M:1997 Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
AWS A5.28/A5.28M:2005 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
AWS A5.29/A5.29M:2005 Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
ANSI/AWS A5.32/A5.32M-97 (R2007) Specification for Welding Shielding Gases
AWS A5.36/A5.36M:2012 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes or Gas Metal Arc Welding
AWS B2.1/B2.1M:2009 Specification for Welding Procedure and Performance Qualification
Page 62-63 - Figure B.5A and B.5B
AWS B2.1:2005 Specification for Welding Procedure and Performance Qualification
AWS B2.1-1/8-229:2002 Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1-S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, ER309(L) and E309(L) -15, -16, or -17, As-Welded Condition, Primarily Pipe Applications
AWS B2.1-1-011:2002 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Galvanized Stainless Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
AWS B2.1-1-205:1996 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel , 1/8" through 3/4" thick, As Welded condition, Primarily Pipe Applications
AWS B2.1-4-218:1999 Standard Welding Procedure Specification (WPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4), Group 1 or 2) E8018-B2, 1/8 through _ in. Thick, As-Welded Condition, 1/8 through 1-1/2 in.Thick, PWHT Condition, Primarily Pipe Applications
AWS B2.1-A-223:1999 Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chrome-Moly Steel, 1/8"-1-1/2" thick, As-welded or PWHT condition, Primarily Pipe Applications
AWS B2.1-4-220:1999 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications
AWS B2.1-8-005:2002 Standard Welding Procedure Specification (SWPS) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Ausenitic Stainless Steel (M-8, P-8, S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without backing
AWS C3.2M/C3.2:2001 Standard Method for Evaluating the Strength of Brazed Joints
AWS C3.7M/C3.7:2005 Specification for Aluminum Brazing - Temperature Uniformity Requirements
AWS C3.7M/C3.7:2005 Specification for Aluminum Brazing - Procedure for Dip Brazing
ANSI/AWS C5.4-93 Recommended Practices for Stud Welding
AWS C5.10/C5.10M:2003 Recommended Practices for Shielding Gases for Welding and Cutting
AWS D1.1:2002 Structural Welding Code — Steel
AWS D1.1/D1.1M:2008 Structural Welding Code — Steel
AWS D1.3/D1.3M:2008 Structural Welding Code - Steel
AWS D1.4/D1.4M:2011 Structural Welding Code – Reinforcing Steel
AWS D1.4/D1.4M:2005 Structural Welding Code – Reinforcing Steel
AWS D1.6/D1.6M:2007 Structural Welding Code – Stainless Steel
AASHTO/AWS D1.5M/D1.5:2008 Bridge Welding Code
AASHTO/AWS D1.5:2008 Bridge Welding Code
AWS D3.7:2004 Guide for Aluminum Hull Welding
AWS D10.7M/D10.7:2000 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
AWS D14.6/D14.6M:2005 Specification for Welding Rotating Elements of Equipment
AWS D14.7/D14.7M:2005 Recommended Practices for Surfacing and Reconditioning of Industrial Mill Rolls
AWS D15/D15.1M:2007 Railroad Welding Specification for Cars and Locomotives
AWS D15.1:2001 Railroad Welding Specification — Cars and Locomotives

AWS D15.2:2003

Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles
AWS D17.1:2001 Specification for Fusion Welding for Aerospace Applications


Historical Standards' Errata

AWS A5.28:1996 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Metal Arc Welding
AWS D1.1/D1.1M:2004 Structural Welding Code—Steel
AWS D1.1/D1.1M:2002
Structural Welding Code—Steel
AWS D1.1/D1.1:2000
Structural Welding Code—Steel
AWS D1.2-97
Structural Welding Code—Aluminum
AWS D1.3-89
Structural Welding Code—Sheet Steel
AWS D1.4-98
Structural Welding Code—Reinforcing Steel
AASHTO/AWS D1.5-96
Bridge Welding Code

Viewing Technical .PDF Files on Your Web Browser
More and more information is being and will be transmitted via .pdf files. These files can be downloaded and viewed with Adobe's free Acrobat Reader software or viewed directly within your browser.
To view the .pdf files within your browser download Acrobat Reader.