Poster Session

UNDERGRADUATE - STUDENT LEVEL

Cryogenic Cooling on Microstructure and Strength of Brazed Joints: Cryogenic Thermal Cycling Effect by Chris Faith, Eli Gould and Anthony McNeal, The Ohio State University

Effect of Heat Input with Spray Transfer, Pulsed-GMAW, and Pulsed-Cold Metal Transfer on Distortion of T-Joints by Howah Lui, Brian Ricks and Joe Walko, The Ohio State University

Experiments with Linear Vibration Welding of PMMA to ABS and PMMA to PC by Andrew Green, David Harmon and David Schick, The Ohio State University

A Study in Brazing Titanium Heat Exchangers: Applying Low Melting Filler Metal by Thermal Spray by Marc Purslow, Geoff Murray and Melissa Rubal, The Ohio State University

Microscale Fiber Laser Weld in Austenitic Stainless Steel Spiking and Porosity Suppression Techniques by Matt Reiter, Chuck Violand and Kate Mantkowski, The Ohio State University

Optimized Back Bead Geometry: Robotic V-Groove Welding Without a Backing Strip by Trent Moyer, Stephen Forrest and Stephen Truska, The Ohio State University

Low Distortion in Thick Plate GMAW Fabrication: Decoupling Heat Input fro Nugget Area by Todd Renz, Mathew White and Chris Wright, The Ohio State University

Cause of Porosity in LENS-Processed Material by Nick Balzer, Vince Arnett, Jon Reid and Benjamin Spengard, The Ohio State University

Heat Affected Zone Control in 9% Ni Steel by Pat Varga, Ian Gilmore and Mike Wise, The Ohio State University

Electrode Weldability Across Different Power Supplies: Investigation of Transformer-Rectifiers and Inverters by Michael Skrjanc and Steven Leopold, The Ohio State University

Joining Aluminum to Carbon Fiber by Joshua G. Bollin, John Brunnett and Ryan Bucurel, The Ohio State University

Design Optimization of Nuclear Fuel Rods with End Plug Welds by Travis Grohoske and Lennon Meyer, The Ohio State University

Examination of Phase Transformations during PWHT of Steel P91 by John Siefert and Bridget King, The Ohio State University

GRADUATE DEGREE STUDENT LEVEL

Friction Stir Processing of Ti-5111 by Melissa J. Rubal, John C. Lippold and Mary C. Juhas, The Ohio State University

Wide Gap Braze Repair of High Temperature Steels by Christopher Wilkins and Stephen Liu, Colorado School of Mines

Stability of Explosively Bonded Titanium-Steel Clads: Effects of High Pressure and High Oxidizing Service Environment by Brian Hansford, Colorado School of Mines

Physical Simulation of Ferrous Friction Stir Welds: Focusing on Grain Size Evolution in HSLA-65 by David Failla, The Ohio State University

Effect of Purity of A12O3 to Joining-ability to Copper by Michikatsu Akagami, Yuki Sano, Tomohiro Ishii, Hiroaki Zaima, Yasuyuki Miyazawa and Tadasi Ariga, TOKAI University

Brazing of A1N Ceramics to Copper under Ar-gas Atmosphere by Kazuhiro Uehira, Takayuki Otuka, Keisuke Seto, Yousuke Aoki, Yasuyuki Miyazawa and Tadashi Ariga, TOKAI University

Brazing-ability of Cd-Free Cu-based Brazing Filler Metal to Copper by Kazuhiko Kaneko, Noriko Akahoshi, Tetsu Yanai, Lamphanh Ssamouth, Yasuyuki Miyazawa and Tadashi Ariga, TOKAI University

Interfacial Reaction between Steel and Heat Resistant Cu-Fe Alloy with Brazing by Kohei Ozawa, Tomoyuki Kurokawa, Fauzun, Yasuo Miyamoto, Yasuyuki Miyazawa and Tadashi Ariga, TOKAI Unversity

Brazing of Ferritic Stainless Steel with Using Ni-based Brazing Filler Metal by Syuuji Ujiie, Naoaki Umeyama, Seiji Kato, Yasuyuki Miyazawa and Tadashi Ariga, TOKAI University

Effect of Ag Content to Soldering-ability of Pb-free Sn-Ag-Cu Solder by Yoji Kanaya, Tomohiro Kimura, I Gusti Bagus Budi Dharma, Tadashi Sawamura, Yasuyuki Miyazawa and Tadashi Ariga, TOKAI Unviversity

PROFESSIONAL/COMMERCIAL LEVEL

Development of Novel Fe-Cr Based Brazing Filler Metal by Kotaro Matsu, Yasuyuki Miyazawa and Tadashi Ariga, Tokyo Braze Co., Ltd.

DeltaSpot – A Perfect Solution to Weld Aluminum: Resistance Spot Welding with Process Tape by Stefan Mayr, Fronius USA

ISO-Inteny Contour vs. ISO Laser Beam Resitpresentation by Danny O. MacCallum and Gerald Knorovsky, Sandia National Laboratories