Index of Authors, Speakers, and Presiding Officers

Back to Abstracts Home | Table of Contents

INDEX SYMBOLS: Number followed by letter denotes the Technical Session number and specific paper presented at the 85^th AWS Annual Convention. "BS" preceding nember denotes the 2004 International Brazing and Soldering Symposium session number; and "SP" denotes the Sponsored Sessions. Numbers or letters preceded by "CH" denote chair or cochair for that session. "P" denotes a poster in the Professional Category; "SPA", "SPB", and "SPC" denote a poster in the Student Category.

Feras Al-Baiya Colorado School of Mines	3A
Garrett J. Atkins Colorado School of Mines	1B
Sudarasanam Suresh Babu Oak Ridge National Laboratory	CH6, 4D, 4E, 6A, 6B, 8E, 12E
Dorian K. Balch Sandia National Laboratories	12B
Mikal C. Balmforth Sandia National Laboratories	12A, 12B
O. M. Barabash Oak Ridge National Laboratory	6B
R. I. Barabash Oak Ridge National Laboratory	6B
Brian Baughman Edison Welding Institute	3B
John R. Berger Colorado School of Mines Division of Engineering	7E
John E. Bernal Sandia National Laboratories	8C
Scott Bohnenstiehl Montana Technical University	8A
Roger Bushey ESAB	2D
Charles H. Cadden Sandia National Laboratories	CH12, 12B
G. Cao University of Wisconsin-Madison	7C
Robert W. Carpenter Los Alamos National Laboratory	11A
Kevin R. Chan University of Waterloo Dept. of Mechanical Engineering	12D
Justin Chandeler Colorado School of Mines	4B
Justin Chandler Colorado School of Mines	4A
Luo Chen University of Rochester	8A
Gregory M. Chirieleison Colorado School of Mines	7D
Di-Shyang Chou IWTRL	7A
Craig Clasper Colorado School of Mines	4A, 4B
Carl Cross Montana Technical University	CH1
Craig Dallam The Lincoln Electric Co.	4C
Brian Damkroger Sandia National Laboratories	CH7
Stan David Oak Ridge National Laboratory	4D, 4E, 6A, 6B, 8E, 12C
A. De Mechanical Engineering Department	11C
Mabel Ramini de Rissone Facultad Regional San Nicolas Universidad Tecnologica Nacional	3C
Luis de Vedia UNSAM, CIC, Argentina	3C
Tarasankar DebRoy Pennsylvania State University	5A, 5B, 6C, 11B, 11C
Chris Debrunner Colorado School of Mines	3A, 5D
John J. DeLoach Naval Surface Warfare Center Carderock Division	SP1B, SP1C, P1E
Yuquan Ding University of Waterloo Dept. of Mechanical Engineering	12D
Shijie J. Dong University of Waterloo Dept. of Mechanical Engineering	12D
Randall Dull Edison Welding Institute	2C
John N. DuPont Lehigh University	6D, 9E, 9F, 10B
Glen Edwards Colorado School of Mines	4A, 4B
J. W. Elmer Lawrence Livermore National Laboratory Chemistry & Materials Science	CH10, 4D, 10A
Dave Farson The Ohio State University	11E
Frank Feng Alcan International Limited Kingston Research and Development Center	1C
Zhili Feng Oak Ridge National Laboratory	CH5, 8D, 9F, 12C
Russell S. Fielder Naval Surface Warfare Center Carderock Division	SP1B
Richard Fields NIST	2A
David R. Forrest Naval Surface Warfare Center Carderock Division	SP1A, SP1C
Phillip W. Fuerschbach Sandia National Laboratories	8C, 11B
Frank Gayle NIST	2A
J. E. Gould Edison Welding Institute	12E
Dennis Harwig Edison Welding Institute	CH3, 3B
Xiuli He Pennsylvania State University	11B
G. Ken Hicken Sandia National Laboratories	12A
K. Hildebrand AoC	2D
Pat Hochanadel Los Alamos National Laboratory	CH8
Frederick M. Hooper Sandia National Laboratories	11D
J. A. Horton, Jr. Oak Ridge National Laboratory	6B
C. Huang University of Wisconsin-Madison	7C
D. A. Johnson Department of Mechanical Engineering University of Waterloo	5C
Erika A. Johnson Rensselaer Polytechnic Institute	8A
Gonghyun Jung Edison Welding Institute	2B
Jae Pil Jung University of Waterloo Department of Mechanical Engineering	6E
Gonghyun Jung Edison Welding Institute	7A, 7B
Joseph Kalp Naval Surface Warfare Center Carderock Division	SP1D
S. L. Kampe Virginia Tech	8E
Kyung In Kang University of Seoul Dept of Materials Science & Engineering	6E
Shawn M. Kelly Oak Ridge National Laboratory Joint Institute for Computational Sciences	8E
H. W. Kerr Department of Mechanical Engineering University of Waterloo	5C
C. H. Kim The Pennsylvania State University	5A
Peter Kinney Robert W. Hunt Co.	11E
Gerald A. Knorovsky Sandia National Laboratories	9F, 10C, 10D, 11D
Damian Kotecki The Lincoln Electric Co.	2D
Sindo Kou Dept of Materials Science & Engineering University of Wisconsin	7C
Amit Kumar Pennsylvania State University	5B
Che-wei Kuo National Chung Hsing University Department of Materials Engineering	6F
Jae Sik Lee University of Seoul Dept of Materials Science & Engineering	6E
John Y. Levene Rensselaer Polytechnic Institute	8A
Leijun Li Utah State University Dept of Mechanical and Aerospace Engineering	A
Thomas Lienert Los Alamos National Laboratory	1A, 11A
San-San Lin Chung-Hsing E&M Ltd.	7A
Wangen Lin Edison Welding Institute	CH9
John C. Lippold The Ohio State University	9A, 9B, 9C
Stephen Liu Colorado School of Mines	CH2, 4A, 4B, 4C
Stephen Liu Colorado School of Mines	7D
Jeff Lu Luxtera, Inc.	8D
Stephen Luckowski US Army ARDEC	7D
Danny O. MacCallum Sandia National Laboratories	10C, 10D, 11D
Jeff Major Colorado School of Mines	4C
Arnold R. Marder Lehigh University	9E
Murugananth Marimuthu Oak Ridge National Laboratory	4E
Dave McColskey NIST	2A
Chris McCowan NIST	2A, 2D
Robert W. Messler, Jr. Rensselaer Polytechnic Institute	8A
E. A. Metzbower US Naval Research Laboratory	SP1E
S. Mishra The Pennsylvania State University	6C
Joon Kwon Moon LG Electronics Institute	6E
David R. Munoz Colorado School of Mines Division of Engineering	7E
Tom Mustaleski BWXT Y-12 Plant	10A
Tam C. Nguyen Department of Mechanical Engineering University of Waterloo	5C
Jennifer P. Nguyen Naval Surface Warfare Center Carderock Division	SP1B, SP1D
Ken Nicklas BWXT Y-12 Plant	10A
Frederick F. Noecker II Lehigh University	6D
Jerome T. Norris Sandia National Laboratories	8C
Brooke M. Nowak-Neely Sandia National Laboratories	10D, 11D
David L. Olsen Colorado School of Mines	1B
Toby Padilla Colorado School of Mines Division of Engineering	7E
William A. Palko Naval Surface Warfare Center Carderock Division	SP1B
Todd Palmer Lawrence Livermore National Laboratory	CH11, 10A
Jin-Woo Park Oak Ridge National Laboratory	6A
Matthew J. Perricone Lehigh University	10B
W. Petterson Edison Welding Institute	12E
Maria Posada Naval Surface Warfare Center Carderock Division	SP1B
Joseph D. Puskar Sandia National Laboratories	12A, 12B
Timothy P. Quinn NIST	7E
Marie Quintana The Lincoln Electric Co.	CH4, 4C, 4D
Jose Ramirez Edison Welding Institute	9A
Antonio J. Ramirez The Ohio State University	9C
Mark Reece Sandia National Laboratories	9F
Jonathan R. Regina Lehigh University	9E
Richard Richardson The Ohio State University	3B
Charles V. Robino Sandia National Laboratories	9F
Ronald A. L. Rorrer University of Colorado	7E
Mark Rowe Haynes International Inc.	9D
Daniel Ryan The Ohio State University	9B
M. L. Santella Oak Ridge National Laboratory	12E
Phillip W. Sauser U. S. Army Corps of Engineers	2B
Shu Shi The Ohio State University	9A
Tom Siewert NIST	2A, 2D
Brian P. Somerday Sandia National Laboratories	12B
Jeffrey W. Sowards The Ohio State University	9C
John P. Steele Colorado School of Mines	3A, 5D
Estela Silvia Surian Facultad de Ingeniería de la Universidad Nacional de Lomas de Zamora	3C
Hernan Svoboda Facultad de Ingenieria UBA	3C
Peter Terrill Lawrence Livermore National Laboratory	10A
Kim N. Tran Naval Surface Warfare Center Carderrock Division	SP1A
Chon Tsai The Ohio State University	2B, 7A, 7B
Tyrone Vincent Colorado School of Mines	3A, 5D
J. M. Vitek Oak Ridge National Laboratory	4D
John M. Vitek Oak Ridge National Laboratory	6A
Xun-Li Wang Oak Ridge National Laboratory	12C
D. C. Weckman Department of Mechanical Engineering University of Waterloo	5C, 8B
Michael Wells Naval Surface Warfare Center Carderrock Division	CHSP1, 7D, SP1A
Richard J. Wong Naval Surface Warfare Center Carderock Division	SP1C
Weite Wu National Chung Hsing University Department of Materials Engineering	6F
T. Zacharia Oak Ridge National Laboratory Joint Institute for Computational Sciences	8E
Wei Zhang The Pennsylvania State University Dept. Materials and Engineering	5A
J. Zhang University of Waterloo Dept. of Mechanical Engineering	8B
Y. Norman Zhou University of Waterloo Department of Mechanical Engineering	6E, 8B, 12D