An AWS conference all about Codes and Standards is scheduled for July 16-17, 2013 in Orlando, FL.
Technical standards are among the most valuable documents available to manufacturers and fabricators of welded products. This AWS conference will take a deep dive into AWS D1 structural codes, the ASME Boiler and Pressure Vessel Code, API pipeline codes, and military and ISO standards. Designers, inspectors, and QC specialists will gain new insights and career-enhancing knowledge.
Tuesday, July 16, 2013 |
8:15 a.m. - 8:30 a.m. |
Welcome Remarks
Paul Blomquist, On-Site Chairman
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
SESSION 1 |
|
|
Welcome, introduction, and overview of the conference program. |
8:30 a.m. - 9:00 a.m. |
Changes to AWS D1.1 Structural Code - Steel
Richard D. Campbell, Bechtel Construction Operations Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
9:00 a.m. - 9:30 a.m. |
Use of AWS Structural Welding Codes for Nuclear Construction
Shane Findlan PE, CB&I
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
9:30 a.m. - 10:00 a.m. |
Welding Consumable Procurement for Nuclear Construction
William F. Newell, Jr., Euroweld Ltd.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
10:00 a.m. - 10:30 a.m. |
MORNING BREAK |
10:30 a.m. - 11:00 a.m. |
Software Simplifies Code Compliance
Mike Bernasek, C-Spec
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
11:00 a.m. - 11:30 a.m. |
An Update on the API 1104 Code
Matt Boring, Kiefner & Associates, Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
12:00 p.m. - 1:00 p.m. |
LUNCH |
SESSION 2 |
|
1:00 p.m. - 1:30 p.m. |
Qualification of Hybid Laser Arc Welding - How Do We Get There?
Paul Blomquist, Applied Thermal Sciences, Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
1:30 p.m. - 2:00 p.m. |
Codes and Standards for Weld Inspections
Michael Moles, Olympus NDT
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
2:00 p.m. - 2:30 p.m. |
AFTERNOON BREAK |
2:30 p.m. - 3:00 p.m. |
How Will the A5.32 Revisions Help You Understand More About Shielding
Kevin A. Lyttle, Praxair, Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
3:00 p.m. - 3:30 p.m. |
Tip Tig Welding: A Code Acceptable Variation of GTAW
Jeremy Wright, Arc Innovations Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
|
The speaker will discuss discontinuities normally encountered in aluminum arc welds, methods to detect them, the possible causes, and the means to avoid them. |
| |
Wednesday, July 17, 2013 |
SESSION 3 |
|
|
Welcome, introduction, and overview of the conference program. |
8:30 a.m. - 9:00 a.m. |
Section IX of the ASME Code - New and Improved
Walt Sperko, Sperko Engineering Services, Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
9:00 a.m. - 9:30 a.m. |
Changes in AWS D1.2 Structural Welding Code – Aluminum
Thom Burns, AlcoTec Wire Corp.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
9:30 a.m. - 10:00 a.m. |
Some Observations Concerning the AWS B2.1 Code
Richard L. Holdren, ARC Specialties & Consulting Services
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
10:00 a.m. - 10:30 a.m. |
MORNING BREAK |
10:30 a.m. - 11:00 a.m. |
Changes to AWS D1.6 Structural Code – Stainless Steel
Richard D. Campbell, Bechtel Construction Operations Inc.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
11:00 a.m. - 11:30 a.m. |
Standards for Friction Stir Welding Aluminum
David Bolser, The Boeing Co.
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
12:00 p.m. - 1:00 p.m. |
LUNCH |
SESSION 4 |
|
1:00 p.m. - 1:30 p.m. |
NBIC Part 3/ANSI NB-23 Repair and Alteration Code
Robert Ferrell, The National Board of Boiler and Pressure Vessell Inspectors
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
1:30 p.m. - 2:00 p.m. |
AWS/ANSI D16 Welding Standards Lead the US Robot Industry
Vern Mangold, Jr, Kaysafety
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
2:00 p.m. - 2:30 p.m. |
AFTERNOON BREAK |
2:30 p.m. - 3:00 p.m. |
AWS D17.1 - Fusion Welding of Aerospace Alloys
Ian D. Harris, Edison Welding Institute
Anthony (Tony) Anderson is the Director of Aluminum Technology for ITW Welding North America in Appleton WI. Mr. Anderson is a Fellow of the TWI (British welding Institute) and a Registered Chartered Engineer with the British Engineering Council UK. He is the Chairman of the Aluminum Association Technical Advisory Committee for Welding and Joining and participates in the following American Welding Society committees and activities:
AWS D10.7 Arc Welding of Aluminum Alloy Pipe (Chairman)
AWS A5.10 Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods (Chairman)
AWS D3.7 Guide for Aluminum Hull Welding (Chairman)
AWS D1.2 Structural Welding Code – Aluminum (Advisor)
American Welding Society Conference Committee (Vice Chairman)
AWS Director-at-Large
He is an American Welding Society Certified Welding Inspector (CWI), Certified Welding Educator (CQE) and Certified Welding Engineer (CWEng). Mr. Anderson writes a regular aluminum welding question and answer column (11th consecutive year) for the American Welding Society Welding Journal and he is the author of the AWS publication welding Aluminum Questions & Answers (2nd Edition).
|
|
Welcome, introduction, and overview of the conference program. |
3:00 p.m. |
ADJOURNMENT |
