Robotics D16.1M/D16.1:2004, Specification for Robotic Arc Welding Safety Specifies safety requirements with respect to the design, manufacture, maintenance, and operation of arc welding robot systems and ancillary equipment for gas metal arc welding and flux cored arc welding. Identifies and minimizes hazards involved in maintaining, operating, integrating, and setting up of arc welding robot systems. 26 pages, 1 figure (2004). Order Code: D16.1 $52/$39 D16.2M/D16.2:2007, Guide for Components of Robotic and Automatic Arc Welding Installations Performance recommendations for evaluating components of a typical robotic or automatic welding installation. A pin arrangement and specific pin function for each location in a standardized 37-pin connector are proposed. 32 pages, 4 figures, 4 tables (2007) Order Code: D16.2 $56/$42 D16.3M/D16.3:2009, Risk Assessment Guide for Robotic Arc Welding See page 12. D16.4M/D16.4:2005, Specification for the Qualification of Robotic Arc Welding Personnel Provides requirements for the qualification of robotic arc welding support personnel at three different levels: CRAW-L1, CRAW-O, and CRAW-T, and is the basis for the AWS Certification of Robotic Arc Welding Personnel (CRAW) program. 22 pages, 2 annexes, 3 figures, 4 tables (2005). Order Code: D16.4 $52/$39 23 Computerization NEW PUBLICATION: A9.5:2013, Guide for Verification and Validation in Computation Weld Mechanics Provides guidance for assessing the capability and accuracy of computational weld mechanics (CWM) models. Presents current practices for heat transfer, microstructure, residual stress, and distortion calculations. Provides general guidance for implementing verification and validation (V&V) of computational models for complex systems in weld mechanics. 40 pages, 7 figures (2013). Order Code: A9.5 $60/$45 Plastics G1.1M/G1.1:2006, Guide to Ultrasonic Assembly of Thermoplastics Details the ultrasonic equipment and processes used in fabricating thermoplastic parts. 94 pages, 45 figures, 9 tables (2006). Order Code G1.1 $72/$54 G1.2M/G1.2:1999(R2010), Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics Helps minimize variations in the geometry, welding, and testing of the ultrasonic welding test sample for thermoplastics. Detailed figures show tolerances on critical dimensions that may affect weldability. Use this specification for studies on the ultrasonic welding of thermoplastics, weldability studies, and optimizations. 36 pages (Reaffirmed 2010). Order Code: G1.2 $52/$39 G1.6:2006, Specification for the Qualification of Plastics Welding Inspectors for Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds Defines the qualification requirements for plastics welding inspectors. 22 pages (2006). Order Code G1.6 $52/$39 G1.10M:2001, Guide for the Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds Lists and describes defects in welded joints in thermoplastic materials, and classifies each into one of three quality grades, allowing specific defects to be excluded or kept within limits. 44 pages (2001). Order Code: G1.10 $60/$45 B2.4:2012, Specification for Welding Procedure and Performance Qualification for Thermoplastics Includes requirements for qualification of Welding Procedure Specifications, welders, and welding operators for manual, semi-automatic, mechanized, and automatic welding. Covers electrofusion, hot gas, socket fusion, butt contact fusion, infrared, extrusion welding, and flow fusion welding processes, as well as base materials, filler materials, qualification variables, and testing requirements. Adopted by NBIC. 54 pages, 21 figures, 12 tables (2012). Order Code: B2.4 $64/$48 Railroad D15.1/D15.1M:2012, Railroad Welding Specification for Cars and Locomotives Specifies requirements for the manufacture and maintenance of railroad equipment. Includes procedure and performance qualification, including welder operator and tack welder qualification, design of welded joints, inspection, and acceptance criteria. Not applicable to tank car tanks or rails. 232 pages, 83 figures, 39 tables (2012). Order Code: D15.1 $136/$102 NEW EDITION: D15.2/D15.2M:2013, Recommended Practices for the Welding of Rails and Related Rail Components for Use by Rail Vehicles Recommends the minimum standards for the welding of rails and related rail components used by rail vehicles. Covers repair procedures for rails and austenitic manganese steel components, thermite welding, electric flash welding guidelines, procedure qualification, and welder qualification. 64 pages, 23 figures, 7 tables (2013) Order Code: D15.2 $68/$51
AWS Publications Catalog | Summer 2013
To see the actual publication please follow the link above