Index of Standards by Code Number A1.1—Metric Practice Guide for the Welding Industry . . . . . . . . . . . . . .2 A9.5—Guide for Verification and Validation in Computation A2.1—Welding Symbol Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Weld Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 A2.4—Standard Symbols for Welding, Brazing, and Nondestructive A10.1M—Specification for Calibration and Performance Testing of Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Secondary Current Sensing Coils and Weld Monitors Used in Single-Phase AC Resistance Welding . . . . . . . . . . . . . . . . . . . . . .36 A3.0M/A3.0—Standard Welding Terms and Definitions . . . . . . . . . . . .2 B1.10M/B1.10—Guide for the Nondestructive Examination of Welds .15 A3.1—Master Chart of Welding and Joining Processes . . . . . . . . . . . . .2 B1.11—Guide for the Visual Examination of Welds . . . . . . . . . . . . . . .15 A4.2M (ISO 8249 MOD)—Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and B2.1-X—Standard Welding Procedure Specifications . . . . . . . . . . . .24-5 Duplex Ferritic-Austenitic Stainless Steel Weld Metal . . . . . . . . . .31 B2.1/B2.1M—Specification for Welding Procedure and Performance A4.3—Standard Methods for Determination of the Diffusible Hydrogen Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal B2.1/B2.1M-BMG—Base Metal Grouping for Welding Procedure and Produced by Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Performance Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 A4.4M—Standard Procedures for Determination of Moisture Content B2.2/B2.2M—Specification for Brazing Procedure and Performance of Welding Fluxes and Welding Electrode Flux Coverings . . . . . . . .31 Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 A4.5M/A4.5 (ISO 15792-3 MOD)—Standard Methods for Classification B2.3/B2.3M—Specification for Soldering Procedure and Performance Testing of Positional Capacity and Root Penetration Qualification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 of Welding Consumables in a Fillet Weld . . . . . . . . . . . . . . . . . . . .31 B2.4—Specification for Welding Procedure and Performance A5.01M/A5.01 (ISO 14344 MOD)—Procurement Guidelines for Qualification for Thermoplastics . . . . . . . . . . . . . . . . . . . . . . . . . .23 Consumables–Welding and Allied Processes–Flux and Gas B4.0—Standard Methods for Mechanical Testing of Welds, U.S. Shielded Electrical Welding Processes . . . . . . . . . . . . . . . . . . . . .32 Customary Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 A5.02/A5.02M—Specification for Filler Metal Standard Sizes, B4.0M—Standard Methods for Mechanical Testing of Welds, Metric Packaging, and Physical Attributes . . . . . . . . . . . . . . . . . . . . . . . .32 Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 A5.1/A5.1M—Specification for Carbon Steel Electrodes for Shielded B5.1—Specification for the Qualification of Welding Inspectors . . . . . .12 Metal Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 B5.2—Specification for the Qualification of Welding Inspector A5.2/A5.2M—Specification for Carbon and Low-Alloy Steel Rods for Specialists and Welding Inspector Assistants . . . . . . . . . . . . . . . .12 Oxyfuel Gas Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 B5.4—Specification for the Qualification of Welder Test Facilities . . . .12 A5.3/A5.3M—Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . .32 B5.5—Specification for the Qualification of Welding Educators . . . . . .12 A5.4/A5.4M—Specification for Stainless Steel Electrodes for B5.9—Specification for the Qualification of Welding Supervisors . . . . .12 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 B5.14—Specification for the Qualification of Welding Sales A5.5/A5.5M—Specification for Low-Alloy Steel Electrodes for Representatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 B5.15—Specification for the Qualification of Radiographic Interpreters . . .12 A5.6/A5.6M—Specification for Copper and Copper-Alloy Electrodes B5.16—Specification for the Qualification of Welding Engineers . . . . .12 for Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . .32 B5.17—Specification for the Qualification of Welding Fabricators . . . .12 A5.7/A5.7M—Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C1.1M/C1.1—Recommended Practices for Resistance Welding . . . . .36 A5.8M/A5.8—Specification for Filler Metals for Brazing and C1.4M/C1.4—Specification for Resistance Welding of Carbon and Braze Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Low-Alloy Steels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 A5.9/A5.9M—Specification for Bare Stainless Steel Welding C1.5—Specification for the Qualification of Resistance Welding Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Technicians . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 A5.10/A5.10M (ISO 18273 MOD)—Welding Consumables—Wire C2.16/C2.16M—Guide for Thermal-Spray Operator Qualification . . . .18 Electrodes, Wires and Rods for Welding of Aluminum and Aluminum- C2.18—Guide for the Protection of Steel with Thermal Sprayed Alloys—Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Coatings of Aluminum and Zinc and Their Alloys and Composites .18 A5.11/A5.11M—Specification for Nickel and Nickel-Alloy C2.20/C2.20M—Specification for Thermal Spraying Zinc Anodes on Welding Electrodes for Shielded Metal Arc Welding . . . . . . . . . . . .32 Steel Reinforced Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 A5.12M/A5.12 (ISO 6848 MOD)—Specification for Tungsten and C2.21M/C2.21—Specification for Thermal Spray Equipment Tungsten-Alloy Electrodes for Arc Welding and Cutting . . . . . . . . .32 Acceptance Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 A5.13/A5.13M—Specification for Surfacing Electrodes for Shielded C2.23M/C2.23—Specification for the Application of Thermal Spray Metal Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and A5.14/A5.14M—Specification for Nickel and Nickel-Alloy Bare Composites for the Corrosion Protection of Steel . . . . . . . . . . . . .18 Welding Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C2.25/C2.25M—Specification for Thermal Spray Feedstock—Solid A5.15—Specification for Welding Electrodes and Rods for Cast Iron . .32 and Composite Wire and Ceramic Rods . . . . . . . . . . . . . . . . . . . .32 A5.16/A5.16M—Specification for Titanium and Titanium-Alloy C3.2M/C3.2—Standard Method for Evaluating the Strength of Brazed Welding Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 A5.17/A5.17M—Specification for Carbon Steel Electrodes and Fluxes C3.3—Recommended Practices for the Design, Manufacture, and for Submerged Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Examination of Critical Brazed Components . . . . . . . . . . . . . . . . .26 A5.18/A5.18M—Specification for Carbon Steel Electrodes and Rods C3.4M/C3.4—Specification for Torch Brazing . . . . . . . . . . . . . . . . . . .26 for Gas Shielded Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C3.5M/C3.5—Specification for Induction Brazing . . . . . . . . . . . . . . . .26 A5.19—Specification for Magnesium Alloy Welding Electrodes and C3.6M/C3.6—Specification for Furnace Brazing . . . . . . . . . . . . . . . . .26 Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C3.7M/C3.7—Specification for Aluminum Brazing . . . . . . . . . . . . . . .26 A5.20/A5.20M—Specification for Carbon Steel Electrodes for Flux C3.8M/C3.8—Specification for the Ultrasonic Pulse-Echo Examination Cored Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 of Brazed Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 A5.21/A5.21M—Specification for Bare Electrodes and Rods for C3.9M/C3.9—Specification for Resistance Brazing . . . . . . . . . . . . . . .26 Surfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C3.11M/C3.11—Specification for Torch Soldering . . . . . . . . . . . . . . .26 A5.22/A5.22M—Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods . . . . . . . . . . . . . . .32 C4.1 SET—Criteria for Describing Oxygen-Cut Surfaces, and Oxygen Cutting Surface Roughness Gauge . . . . . . . . . . . . . . . . . .20 A5.23/A5.23M—Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding . . . . . . . . . . . . . . . . . . . . . . . .32 C4.2/C4.2M—Recommended Practices for Safe Oxyfuel Gas Cutting Torch Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 A5.24/A5.24M—Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C4.3/C4.3M—Recommended Practices for Safe Oxyfuel Gas Heating Torch Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 A5.25/A5.25M—Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding . . . . . . . . . . . . . . .32 C4.4/C4.4M—Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches . . . . . . . . . . . . . .20 A5.26/A5.26M—Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding . . . . . . . . . . . . . . . . . . . . . . . . .32 C4.5M—Uniform Designation System for Oxyfuel Nozzles . . . . . . . . . .20 A5.28/A5.28M—Specification for Low-Alloy Steel Electrodes and C4.6M (ISO 9013 IDT)—Thermal Cutting—Classification of Thermal Rods for Gas Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . . .32 Cuts—Geometric Product Specification and Quality Tolerances . .20 A5.29/A5.29M—Specification for Low-Alloy Steel Electrodes for Flux C5.3—Recommended Practices for Air Carbon Arc Gouging & Cutting .20 Cored Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C5.5/C5.5M—Recommended Practices for Gas Tungsten Arc Welding 20 A5.30/A5.30M—Specification for Consumable Inserts . . . . . . . . . . . .32 C5.7—Recommended Practices for Electrogas Welding . . . . . . . . . . .20 A5.31M/A5.31—Specification for Fluxes for Brazing and Braze Welding .32 C5.10/C5.10M—Recommended Practices for Shielding Gases for A5.32M/A5.32 (ISO 14175 MOD)—Welding Consumables—Gases Welding and Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 & Gas Mixtures for Fusion & Allied Processes . . . . . . . . . . . . . . . .32 C6.1—Recommended Practices for Friction Welding . . . . . . . . . . . . . .20 A5.34/A5.34M—Specification for Nickel-Alloy Electrodes for Flux C6.2/C6.2M—Specification for Friction Welding of Metals . . . . . . . . . .21 Cored Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 C7.1M/C7.1—Recommended Practices for Electron Beam Welding . .19 A5.36/A5.36M—Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and C7.2M—Recommended Practices for Laser Beam Welding, Metal Cored Electrodes for Metal Arc Welding . . . . . . . . . . . . . . .32 Cutting, and Allied Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 42
Publications Catalog - Spring 2013
To see the actual publication please follow the link above