Subject Index FILLER METALS AND FLUXES UGFM User’s Guide to Filler Metals . . . . . . . . . . . . . . . . . .31 A4.2M Standard Procedures for Calibrating Magnetic FLUX CORED ARC WELDING (SEE GAS METAL ARC) (ISO 8249 MOD) Instruments to Measure the Delta Ferrite FLUXES (SEE FILLER METALS AND FLUXES) Content of Austenitic and Duplex Ferritic- Austenitic Stainless Steel Weld Metal . . . . . . . . . .31 FOOD PROCESSING SYSTEMS A4.3 Standard Methods for Determination of the D18.1 Specification for Welding of Austenitic Stainless Diffusible Hydrogen Content of Martensitic, Steel Tube and Pipe Systems in Sanitary Bainitic, and Ferritic Steel Weld Metal (Hygienic) Applications . . . . . . . . . . . . . . . . . . . . .29 Produced by Arc Welding . . . . . . . . . . . . . . . . . . .31 D18.2 Guide to Weld Discoloration Levels on Inside of A4.4M Standard Procedures for Determination of Austenitic Stainless Steel Tube . . . . . . . . . . . . . . .29 Moisture Content of Welding Fluxes and D18.3/D18.3M Specification for Welding of Tanks, Vessels, and Other Welding Electrode Flux Coverings . . . . . . . . . . . . .31 Equipment in Sanitary (Hygienic) Applications . . . .29 A4.5M/A4.5 Standard Methods for Classification Testing of FRICTION WELDING (ISO 15792-3 MOD) Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld . . . . . . . . . .31 C6.1 Recommended Practices for Friction Welding . . . . . . . . .20 A5.01M/A5.01 Procurement Guidelines for Consumables– C6.2/C6.2M Specification for Friction Welding of Metals . . . . . . . . . . .21 (ISO 14344 MOD) Welding and Allied Processes–Flux and Gas D17.3/D17.3M Specification for Friction Stir Welding of Aluminum Shielded Electrical Welding Processes . . . . . . . . . .32 Alloys for Aerospace Applications . . . . . . . . . . . . .34 A5.02/A5.02M Specification for Filler Metal Standard Sizes, GAS METAL ARC WELDING Packaging, and Physical Attributes . . . . . . . . . . . .32 PHB-4 Everyday Pocket Handbook for Gas Metal Arc Welding A5.1/A5.1M Specification for Carbon Steel Electrodes for (GMAW) and Flux Cored Arc Welding (FCAW) . . . . .29 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . .32 PHB-8 Everyday Pocket Handbook for Gas Metal A5.2/A5.2M Specification for Carbon and Low-Alloy Steel Arc Welding (GMAW) of Aluminum . . . . . . . . . . . . .29 Rods for Oxyfuel Gas Welding . . . . . . . . . . . . . . . .32 GAS TUNGSTEN ARC WELDING A5.3/A5.3M Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding . . . . . . . .32 A5.22 Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel A5.4/A5.4M Specification for Stainless Steel Electrodes for Flux Cored Rods for Gas Tungsten Arc Welding . . .32 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . .32 C5.5/C5.5M Recommended Practices for Gas Tungsten Arc A5.5/A5.5M Specification for Low-Alloy Steel Electrodes for Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . .32 D10.6/D10.6M Recommended Practices for Gas Tungsten Arc A5.6/A5.6M Specification for Copper and Copper-Alloy Elec- Welding of Titanium Piping and Tubing . . . . . . . . .28 trodes for Shielded Metal Arc Welding . . . . . . . . .32 A5.7/A5.7M Specification for Copper and Copper-Alloy Bare GOUGING (SEE CUTTING) Welding Rods and Electrodes . . . . . . . . . . . . . . . .32 HEALTH (SEE SAFETY AND HEALTH) A5.8M/A5.8 Specification for Filler Metals for Brazing and INSPECTION23 . . . . . . . . . . . . . . . . . . . . . . . . . . . .gnidleWezarB A5.9/A5.9M Specification for Bare Stainless Steel Welding B1.10M/B1.10 Guide for the Nondestructive Examination of Welds .15 Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . .32 B1.11 Guide for the Visual Examination of Welds . . . . . . . .15 A5.10/A5.10M Welding Consumables – Wire Electrodes, Wires and B4.0 Standard Methods for Mechanical Testing of (ISO 18273 MOD) Rods for Welding of Aluminum and Aluminum- Welds, U.S. Customary Only . . . . . . . . . . . . . . . . .15 Alloys – Classification . . . . . . . . . . . . . . . . . . . . .32 B4.0M Standard Methods for Mechanical Testing of A5.11/A5.11M Specification for Nickel and Nickel-Alloy Welding Welds, Metric Only . . . . . . . . . . . . . . . . . . . . . . . .15 Electrodes for Shielded Metal Arc Welding . . . . . . .32 C3.3 Recommended Practices for the Design, Manufacture, A5.12M/A5.12 Specification for Tungsten and Tungsten-Alloy and Examination of Critical Brazed Components . .28 (ISO 6848 MOD) Electrodes for Arc Welding and Cutting . . . . . . . . .32 C3.8M/C3.8 Specification for the Pulse-Echo Ultrasonic A5.13/A5.13M Specification for Surfacing Electrodes for Examination of Brazed Joints . . . . . . . . . . . . . . . .28 Shielded Metal Arc Welding . . . . . . . . . . . . . . . . . .32 D18.2 Guide to Weld Discoloration Levels on Inside of A5.14/A5.14M Specification for Nickel and Nickel-Alloy Bare Austenitic Stainless Steel Tube . . . . . . . . . . . . . . .31 Welding Electrodes and Rods . . . . . . . . . . . . . . . .32 G1.2M/G1.2 Specification for Standardized Ultrasonic A5.15 Specification for Welding Electrodes and Rods Welding Test Specimen for Thermoplastics . . . . . . . . .25 for Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 G1.6 Specification for the Qualification of Plastics Welding A5.16/A5.16M Specification for Titanium and Titanium-Alloy Inspectors for Hot Gas, Hot Gas Extrusion, and Welding Electrodes and Rods . . . . . . . . . . . . . . . .32 Heated Tool Butt Thermoplastic Welds . . . . . . . . . .25 A5.17/A5.17M Specification for Carbon Steel Electrodes and PHB-2 Everyday Pocket Handbook for Visual Inspection and Fluxes for Submerged Arc Welding . . . . . . . . . . . .32 Weld Discontinuities—Causes and Remedies . . . .15 A5.18/A5.18M Specification for Carbon Steel Electrodes and PHB-6 Everyday Pocket Handbook for Visual Inspection Rods for Gas Shielded Arc Welding . . . . . . . . . . . .32 of AWS D1.1 Structural Welding Code’s Fabrication A5.19 Specification for Magnesium Alloy Welding and Welding Requirements . . . . . . . . . . . . . . . . .15 Electrodes and Rods . . . . . . . . . . . . . . . . . . . . . . .32 QC1 Standard for AWS Certification of Welding Inspectors 14 A5.20/A5.20M Specification for Carbon Steel Electrodes for QC15 Specification for the Certification of Flux Cored Arc Welding . . . . . . . . . . . . . . . . . . . . .32 Radiographic Interpreters . . . . . . . . . . . . . . . . . . .14 A5.21/A5.21M Specification for Bare Electrodes and Rods VIW-M Visual InspectionWorkshop Reference Manual . . . . . . . . .13 for Surfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 WI Welding Inspection Handbook . . . . . . . . . . . . . . . . .15 A5.22/A5.22M Specification for Stainless Steel Flux Cored and Metal WIT-T Welding Inspection Technology . . . . . . . . . . . . . . . . .15 Cored Welding Electrodes and Rods . . . . . . . . . . .32 WIT-W Welding Inspection Technology Workbook . . . . . . . .15 A5.23/A5.23M Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding . . . . . . . . .32 LASER BEAM WELDING A5.24/A5.24M Specification for Zirconium and Zirconium-Alloy C7.2M Recommended Practices for Laser Beam Welding Electrodes and Rods . . . . . . . . . . . . . . . .32 Welding, Cutting, and Allied Processes . . . . . . . . .19 A5.25/A5.25M Specification for Carbon and Low-Alloy Steel C7.4/C7.4M Process Specification and Operator Electrodes and Fluxes for Electroslag Welding . . . .32 Qualification for Laser Beam Welding . . . . . . . . . .19 A5.26/A5.26M Specification for Carbon and Low-Alloy Steel MACHINERY AND EQUIPMENT Electrodes for Electrogas Welding . . . . . . . . . . . . .32 D14.1/D14.1M Specification for Welding of Industrial and Mill Cranes A5.28/A5.28M Specification for Low-Alloy Steel Electrodes and Other Material Handling Equipment . . . . . . . .35 and Rods for Gas Shielded Metal Arc Welding . . . .32 D14.3/D14.3M Specification for Welding Earthmoving, A5.29/A5.29M Specification for Low-Alloy Steel Electrodes Construction, and Agricultural Equipment . . . . . . .35 for Flux Cored Arc Welding . . . . . . . . . . . . . . . . . .32 D14.4/D14.4M Specification for Welded Joints in Machinery A5.30/A5.30M Specification for Consumable Inserts . . . . . . . . . . . .32 and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .35 A5.31M/A5.31 Specification for Fluxes for Brazing and Braze D14.5/D14.5M Specification for Welding of Presses and Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Press Components . . . . . . . . . . . . . . . . . . . . . . . .35 A5.34/A5.34M Specification for Nickel-Alloy Electrodes D14.6/D14.6M Specification for Welding of Rotating Elements for Flux Cored Arc Welding . . . . . . . . . . . . . . . . . .32 of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 A5.36/A5.36M Specification for Carbon and Low-Alloy Steel Flux D14.7/D14.7M Recommended Practices for Surfacing and Cored Electrodes for Flux Cored Arc Welding and Reconditioning of Industrial Mill Rolls . . . . . . . . . .35 Metal Cored Electrodes for Metal Arc Welding . . . .32 D14.8M Standard Methods for the Avoidance of Cold Cracks .21 FMC Filler Metal Comparison Charts (Book) . . . . . . . . . . .31 D14.9/D14.9M Specification for Welding of Hydraulic Cylinders . . . .35 IFS CD International Index of Welding Filler Metal Classifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 39
Publications Catalog - Spring 2013
To see the actual publication please follow the link above