Own the Entire Library of AWS Welding Handbooks! These are the must-have references for engineers, structural designers, technologists, inspectors, welders, welding educators and others who need to understand this dynamic and evolving industry. Put all the facts at your fingertips and make sure you’re on the cutting edge with new and updated material. Here are five good reasons you should add these valuable editions to your library. The books represent: • The largest body of knowledge on welding available anywhere. • Practical, hands-on information that you can put to immediate use. • The most current information on best practices regarding safety, quality, and qualification issues. • Unparalleled authority—chapters are written by leading scientists, engineers, educators, and other technical and scientific experts. Everything is peer-reviewed for accuracy and timeliness. • The most valuable resource on welding on the market today, covering the entire spectrum of welding from science and technology, history, welding processes, and materials and applications. Ninth Edition, Volume 1, Welding Science Ninth Edition, Volume 4, Materials and and Technology Applications, Part 1 Presents the latest developments in the basic science and Extensively revised and updated from the eighth edition, this technology of welding, and general descriptions of processes, comprehensive volume had more than 50 experts in materi- continues with chapters on the physics of welding and cutting; als and materials applications assure its accuracy and the heat flow; welding metallurgy; design; test methods; residual currency of its content. It is a great reference source for stress; welding symbols; tooling and positioning; monitoring engineers, educators, welding supervisors, and welders. and control; mechanized, automated, and robotic techniques; Covers carbon and low-alloy steels; high-alloy steels; coated economics; weld quality; inspection; qualification and steels; tool and die steels; stainless and heat-resisting steels; certification; welding codes and standards; and safe practices. clad and dissimilar metals; surfacing; cast irons; mainte- 932 pages, 17 chapters, 2 appendices, 530 illustrations, 168 nance and repair welding; and underwater welding and cut- tables, hardbound. 8" x 10" (2001). ting. Includes more than 650 pages, 396 line drawings and Order Code: WHB-1.9 $192/$144 photos, and 259 tables. 10 chapters, hardbound, 8" x 10" (2011). Ninth Edition, Volume 2, Welding Order Code: WHB-4.9 $192/$144 Processes, Part 1 Eighth Edition,Volume 3, Materials and Presents comprehensive information on welding and related Applications – Part 1 processes. Contains detailed information on arc welding power Covers nonferrous metals, plastics, composites, and ceramics; sources; shielded metal arc, gas tungsten arc, gas metal arc, flux specialized topics on maintenance and repair welding; under- cored arc, submerged arc, and plasma arc welding processes. water welding and cutting. Includes applications of the specific Includes chapters on electroslag welding, stud welding, oxyfuel metals and processes, weldability, safe practices. Best copy gas welding, brazing, soldering, oxygen cutting, and arc cutting available, 538 pages, 10 chapters, softbound. 81/2" x 101/2" and gouging. 736 pages, 15 chapters, 260 line drawings, (1996). 100 photographs, 148 tables, hardbound. 8" x 10" (2004). Order Code: WHB-3.8 $160/$120 Order Code: WHB-2.9 $192/$144 GET FIVE VOLUMES OF THE CURRENT Ninth Edition, Volume 3, Welding WELDING HANDBOOK SET AT A Processes, Part 2 SUBSTANTIAL SAVINGS. Over 600 pages of comprehensive information on solid-state Ninth Edition, Volumes 1, 2, 3, and 4, plus Eighth Edition, and other welding and cutting processes. The book includes Volume 3. chapters on resistance spot and seam welding, projection Order Code: WHB-ALL $762/$572 welding, flash and upset welding and high-frequency welding. In addition to a chapter on friction welding, a new GET THE TWO HANDBOOK VOLUMES ON chapter introduces friction stir welding, the process that has PROCESSES AT SUBSTANTIAL SAVINGS. users excited about the significant advantages it offers. The Ninth Edition, Volume 2 (Welding Processes, Part 1) and most recent developments in beam technology are discussed Volume 3 (Welding Processes, Part 2). in the greatly expanded chapters on laser beam welding and Order Code: WHB-PRC $288/$216 cutting and electron beam welding. A diverse array of processes are presented in chapters on the ultrasonic welding of metals, explosion welding, diffusion welding and diffusion brazing, adhesive bonding and thermal and cold spraying. The last chapter covers various other welding and cutting processes, including modernized water jet cutting. Written, updated, and peer reviewed by a group of highly respected technical and scientific experts, the book has 15 chapters, more than 400 line drawings and photographs, and a comprehensive index. 669 pages, 15 chapters, 3 appendices, 438 illustrations, 59 tables; hardbound. 8" x 10" (2007) Order Code: WHB-3.9 $192/$144 Most AWS publications are available for download, and can be previewed at www.aws.org/standards 9
Publications Catalog - Spring 2013
To see the actual publication please follow the link above